10x Nex Keystone Jack RJ45 CAT Network Face Wall Plate - 0 1 2 3 4 6 Port

Description: Nex Keystone Jack RJ45 CAT Network Face Plate Wall Plate - 0 1 2 3 4 6 Port STORE FEEDBACK CONTACT ABOUT ME Beauty CCTV Electronics Eyewear Mobile Smart Watch Nex Keystone Jack RJ45 Cat5e Cat6 Network Face Plate Wall Plate - 0, 1, 2, 3, 4, 6 Port - 10 Pack$24.99-Nex keystone insert wall plates provides enough outlet plates for a few renovation projects at home or in the office. Double RJ45 Wall Plate is for versatile use.. - Wallplate Faceplate in white are intended to be compatible with different cabling solutions, including twisted-pair cables, coaxial cables, and HDMI cables and some others. - Wallplate Faceplate for home, office, hotel rooms, offices, multi-functional conference rooms, multimedia classrooms, etc.. - Allow for any type of standard keystone jacks to be mounted which will easily snap into the keystone jack rj45 wall plate , These faceplates can be installed onto low-voltage mounting brackets readily. RJ45 Wall Plate 2 port is very easy to install. - PACKAGE INCLUDE: Keystone Wall Plate & mounting screws for installation. DESCRIPTION RETURNS TERMSNex Keystone wall plates are come in white and also available in 1 port, 2 port, 3 port, 4 port, and 6 port. Any type of keystone jack can snap right into the ports including shielded jacks, RJ45 jacks, RJ45 coupler jacks, RJ11 jacks, HDMI jacks, and coaxial keystone jacks (sold separately). Because the jacks can be replaced and removed there are also blank inserts available to fill a port if a jack were to be removed without having to purchase a faceplate with a different amount of ports. The faceplates are standard sized at 4.5 inches by 2.75 inches and include screws to attach them to a standard sized mud ring.To install a Keystone Wall Plate, first take a measurement of the height of other wall plates in the room/building. They are generally mounted to be about 16 inches off of the ground but this can vary. Take a mud ring (also known as a plaster ring) and hold it backwards and level up against the wall where you wish to mount the wall plate. With the sharp tip of your drywall saw make four marks on the wall on each inside corner of the plaster ring. The first cut to make into the drywall should be a horizontal one. Cutting horizontally first is a general practice because if you were to run into a stud then you can simply re-measure and go to the left or right a couple inches. If you were to cut vertically first you would not know if there is a stud and would therefore have an ugly cut in the middle of your drywall. Once both horizontal lines are cut then cut the vertical ones. Take the plaster ring and bend the tabs inside towards the wall snugly by hand; use pliers to cinch the tabs down into place on the drywall. Keystone Wall Plates come with hardware that is painted to match the color of the face plate. Simply install the keystone jacks into the ports on the face plate and then screw the hardware into place. Do not over tighten the hardware because these wall plates are made out of plastic and would easily crack under too much torque. Return Policy: We accept returns within 30 days after you receive your item(s). To be eligible for a return, your item(s) must be unused and in the same condition in the original packaging. 15% restocking fee will apply for without original packaging returns. All returns must include RMA# (Return Merchandise Authorization). Please email us for RMA#. Refund will be issued to your original method of payment within 48 hours of item received. Shipping Policy: Item(s) will be shipped from Standard Mail Package Service. Shipping comes with tracking number & delivery confirmation. ONLY ship to a PayPal/eBay Confirmed Address. STORE FEEDBACK CONTACT ABOUT ME Nexshop © 2020 All Rights Reserved

Price: 9.99 USD

Location: Flushing, New York

End Time: 2024-10-27T23:44:35.000Z

Shipping Cost: 0 USD