Description: Nanhua NHA-506 exhaust gas analyzer features: It is used to measure the concentration of HC, CO, CO2, O2 in the exhaust gas of gasoline engine of motor vehicles. Among them, HC, CO and CO2 are tested by advanced NDIR non-spectral infrared analysis technology, and O2 is tested by the latest electrochemical analysis technology. LCD (liquid crystal) screen display, easier to set up and operate Automatic calculation and display of excess air coefficient λ It can detect automobile engine emissions using natural gas (CNG), liquefied petroleum gas (LPG) and ethanol gasoline as fuel Small size, light weight, easy to carry and carry Equipped with inductive engine speed measuring pliers RS-232C digital serial communication interface With license plate number input function 1) Main features Multi-mode double idle detection of HC, CO, CO2, O2, NO concentration values in automotive exhaust High-brightness large-screen LCD display, full Chinese operation menu Multi-fuel vehicle detection for compressed natural gas (CNG), liquefied petroleum gas (LPG), ethanol, etc. With license plate input, 200 sets of data storage, access and RS-232 digital communication interface Standard inductive speed measuring pliers Standard preheating for 10 minutes with 5 minute speed preheating emergency detection function It meets the national standard ISO 3930 and the international OIML R99 class I accuracy. 2) Main technical parameters Measuring range: Project range HC 0~9999 ×10-6 (N-hexane equivalent) CO 0~10 ×10-2 (%) CO2 0~18 ×10-2 (%) O2 0~25 ×10-2 (%) NO 0~5,000 ×10-6 (NHA-406 does not support) Indication error: Project Absolute error Relative error HC ±12 ×10-6 ±5% CO ±0.06 ×10-2 (%) ±5% CO2 ±0.5 ×10-2 (%) ±5% O2 ±0.1 ×10-2 (%) ±5% NO ±25 ×10-6 (NHA-406 does not support) ±4% Preheating time: 10min (preheating for 5min emergency test) Response time: no more than 10 seconds, O2 is no more than 12 seconds Power supply: AC220V±10% 50Hz±1Hz or DC12V (optional car power inverter) Operating temperature: +5 ° C ~ +40 ° C Humidity: 5% to 95% [non-condensing] Net weight: 6.0Kg Dimensions: 260mm (width) × 180mm (height) × 450mm (deep) NHA-506 automotive exhaust gas analyzer technical parameters: Environmental conditions NHA-506 Ambient temperature +5℃~+40℃ Relative humidity 5%~95%(Non-condensing) Atmospheric pressure 70KPA~106KPA power supply Voltage AC220V±15% frequency 50HZ±1HZ Measuring range HC carbohydrate (n-hexane equivalent) 0~10000 10-6 VOL CO carbon monoxide 0~10% VOL CO2 carbon dioxide (NHA-206 does not have this item) 0~20% VOL O2 oxygen (NHA-206 does not have this item) 0~25% VOL NO oxynitride (NHA-406/206 does not have this item) 0~5000 10-6 VOL Rotating speed 300~8000r/min Oil temperature 0~+120℃ Resolution HC carbohydrate (n-hexane equivalent) 1-6 VOL CO carbon monoxide 0.01%VOL CO2 carbon dioxide (NHA-206 does not have this item) 0.01%VOL O2 oxygen (NHA-206 does not have this item) 0.01%VOL NO oxynitride (NHA-406/206 does not have this item) 1-6 VOL Rotating speed 10r/min Oil temperature 1℃ Display value tolerance Absolute error Relative error HC carbohydrate (n-hexane equivalent) 0~2000 10-6 VOL ±12 10-6 VOL ±5% ±12 10-6 VOL ±10% CO carbon monoxide ±0.06% VOL ±5% CO2 carbon dioxide (NHA-206 does not have this item) ±0.5%VOL ±5% O2 oxygen (NHA-206 does not have this item) ±0.1%VOL ±5% NO oxynitride (NHA-406/206 does not have this item) ±25 10-6 VOL ±4% measurement method Exhaust Insert 400mm into the exhaust pipe, directly sample, the length of the sampling probe is 900mm, and the length of the sampling tube is 5m. Oil The oil temperature probe is inserted into the engine oil rod hole, the protection tube length is 600mm, and the wire length is 5m. Rotating 1, measuring clamp method: clamped outside the spark plug high voltage line of the first cylinder of the engine, measuring the wire length of the clamp 5m; 2, speed adapter mode: connect the car igniter and battery. Time After preheating, the zero drift and span drift of the instrument 4H does not exceed the allowable error of its display value. Preheat 10 minutes (when the ambient temperature is not lower than 20 °C) other Preheat time 10 minutes Output Interface RS-232C Dimensions (length * width * height) 450*260*180mm weight 6Kg
Price: 2418.13 USD
Location: GZ
End Time: 2024-11-01T07:27:50.000Z
Shipping Cost: 99.99 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Measure concentration of: 100KHz HC,CO,CO2,O2 and NO
Brand: Unbranded
MPN: Does Not Apply
Power: AC220V ±10% 10Hz ± 1Hz Or 110V
Available Variations
Color: with printer(110V)
Price: 2515.03 USD
Available Quantity: 1
Quantity Sold: 0
Color: without printer(220V)
Price: 2418.13 USD
Available Quantity: 1
Quantity Sold: 0
Color: without printer(110V)
Price: 2418.13 USD
Available Quantity: 1
Quantity Sold: 0
Color: with printer(220V)
Price: 2515.03 USD
Available Quantity: 1
Quantity Sold: 0