13 FT Butyl Tape Sealant Strip Glue Adhesive Car Windshield Door Retrofit Reseal

Description: 1 Pc 13ft Black Butyl Headlight Windshield Sealant in a polybag This high-quality synthetic butyl rubber sealant tape is perfect for re-sealing headlights, windshields, and doors on your car. With a thickness of approximately 9mm (0.35'') and a length of approximately 4m (13ft.), this tape is easy to install and provides a strong, long-lasting seal. Included in the package is 1 roll of 13ft. black butyl rubber headlight sealant, featuring easy installation and a black finish as shown in the picture. This tape is a great accessory for any car owner looking to retrofit or reseal their vehicle without the need for expensive repairs. With a 1-year warranty, you can trust in the durability and effectiveness of this product. Description:After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean, free from dust, oil and grease. Release the sealant from the release paper and press it sufficiently around the pinch weld for a complete contact.When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the other coupling part. The purpose of the sealer is to provide for a watertight seal. In cold weather conditions it is best to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.Please kindly understand that slight color difference may vary due to photographing condition. Thank you for your understanding! Rubber Sealant is a black, non-drying, non-hardening synthetic rubber based butyl rubber sealant suitable for use as a placement sealant tape for re-sealing headlights after a retrofit or for installation between the glass and metal/plastic areas of automotive headlights/windscreen. It will remain permanently sealing and waterproofing.Features:· Material: Synthetic Butyl Rubber· Color: Black· Length: Approx. 4m 13ft. (enough for re-sealing about two - four headlight assemblies.)· Thickness: Approx. 9mm 0.35''Application:· After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean, free from dust, oil and grease. Release the sealant from the release paper and press it sufficiently around the pinch weld for a complete contact.· When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the other coupling part. The purpose of the sealer is to provide for a watertight seal. In cold weather conditions it is best to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.Package:· 1 Pcs x 13ft. Black Butyl Rubber Headlight Sealant in a polybag Warranty:· 1 year warranty

Price: 8.7 USD

Location: Fontana, California

End Time: 2024-10-04T14:25:47.000Z

Shipping Cost: N/A USD