1500W Servo Motor 2 HP 1,500 Watt Variable Speed Reverse on the fly Controller

Description: 2 HP 1500W Servo Motor with Reverse on The Fly & E-Stop Controlled Servo Motor Driver. New in box 2024 model with built in speed control. Includes our new 2024 control unit with:Reverse on the fly.Thermal overload protection.Software based jam protection.Adjustable brake.Adjustable soft start.Power outage protection. (Will not restart while you are away)Emergency E_Stop (adjustable between coast and immediate)10 RPM speed increments. (the competition is 100 RPM increments)See image 1 for what is included. All other images are for information only. Truly flat face eases fitting motor up to other flat surfaces. Now comes with M8 X 25 stainless button head bolts. These work well even if you drilled the hole too large. Strait shaft works best for:Horzontal pulley slide and lock into alignmentMulti Sheve pulleys.We have direct fit 15 mm bore pulleys. There is also an adapter available to fit 5/8" bore 3/16" key sheaves. Sold with a custom built matching control unit. Speed is programmable for any range between 200 to 3,000 RPM Note: Settings are limited to 10 RPM intervals. See images for measurements. Note: the maximum distance between control unit and motor is 28 inches. When we say 90 day warranty we mean it. We have a full service repair shop and stock all replacement parts. That way we can perform the warranty within days, right here in Florida.This is what customers say when we warranty our products: Even after the control unit causing some power issues, seller was responsive via text and phone to help diagnose. Ended up replacing the control unit and it works like a dream. 10 stars! Don’t believe me? Check my reviews. Then check the reviews for the US based Chinese sellers. The ones who claim to have “Warranty 6 months”. Make sure and look at the negative reviews. Do not buy another motor from them. Them likely being 1 person with 10 user names. Notice they are all in Cucamonga Ca. There is also a Texas and a NJ address Universal Face Mount 2 HP 1500 Watt ComputerControlled Servo MotorTruly flat face eases fitting motor up to other flat surfaces. Stainless M8 X 25 button head bolts included. Fit easy even if you drilled the hole too large. Make note that:Our face plate is a full 14.5 mm thick and machined out of 6061 aluminum.Our control unit actually does have thermal overload protection. Notice the reset function in the power on/off switch.Our 1,500 watt motor produces a full 16 NM torque. Many only produce 5 NM. This is due to inferior materials used in the build. Hi performance USA version AK30, 2AK30 and others are available at additional cost. See the image with the high performance pulleys we make for these motors. These pulleys fit correct and run true. No sloppy cast iron or die cast out of balance issues. Specifically designed for those converting/upgrading their old time lathes and milling machines, from inferior induction motors to modern design servo motors. Universal fit face mount. This allows for easy adaption to fit many old fashioned lathes and drill press's Notes: See images for measurements of face mount bolt circle. See my other listings for side mount. Runs on typical 110 to 120 volt AC household power supply's (220 to 250V single phase is available, just ask) Includes:A complete servo motor as seen in image one.A stand alone and programmable custom built servo motor driver with overload protection, internal variable speed control, Reverse on the fly, Software based jam protection, Soft Start, Adjustable brake etc.Four Stainless M8 X 25 button head bolts.Whats in the box (see image 1): One 1,500 watt (2 HP) servo motor One customized servo motor controller with internal speed control functions and a thermal overload system.. Motor programming + spindle speeds and Reverse:The motor speed can be programmed to operate in any range chosen by the user. Between 200 and 3,000 RPM's.The full range of speed (RPM's) can also be controlled with just the speed control knob.Speed control programming only requires a few easy steps.Reverse is simple, just hold the yellow button for a few seconds.Programming includes the ability to set bottom and top RPM range separately. In other words you can program the system to run the spindle at any speed or range of speeds you choose (see below). Slowest speed achievable: Motor 200 RPM. Highest speed: 3,000 RPM. Soft start is programmable and will likely be set soft when you receive this motor. This program is very effective in reducing drive belt wear etc.Braking strength is also programmable and will likely be set as low as possible.Self diagnostics with on line fault code chart available on line.Cannot be programmed to communicate with any CNC controller at this time. This is coming soon. This operating system is easier to connect through an isolation board and to CNC Use at your own risk. Our liability is limited to the purchase price of this item.Motor Specifications:Watt: 1500 (2 HP)Voltage: 110VHZ: 60Torque: 16 N.M.RPM: 300 to 3,000 RPM in 10 RPM increments. This listing is for what is seen in the primary image. It will include printed programming instructions. Recent feedback: Fantastic setup! Have this on my Taig lathe with 5c head stock and wow!! Thank u!Can't find this anywhere else. Stupid powerful torque. Great communications. Buy it.Truly professional seller. Great communication. Very detail oriented. The motor and driver assembly is flawless. Will start install on my lathe tomorrow and I am very excited to see this unit in action. will definitely provide additional feedback in the near future. I will recommend this seller to everyone. Shipping: Due to weight it is best to ship USPS priority large flat rate box and to USA only. $5.50 is included in shipping to cover insurance Returns: This item is listed on eBay under their no returns policy. Our return policy on this item is: Buyer has 14 days from the time tracking shows it was delivered to file a return request. Buyer pays shipping. When received we will inspect it. If it is as originally shipped we will refund your purchase. We will not refund your return shipping or the original shipping expense. All items must be returned in new unused and undamaged condition or no refund will be issued. 90 day parts warranty done right here in Florida: We keep all replacement parts in stock. See details, what's covered and for how long etc below. Shipping both ways for all parts returned for warranty is the buyers responsibility. Parts returned will be inspected for unique identification mark and or abuse. If found to be abuse or missing the identity mark, no warranty exchange part will be provided and buyer will be required to pay shipping to get their parts back. Warranty exchange parts may or may not be new but instead refurbished or demos that I have from previous builds. Warranty starts on the day eBay records the system as paid and not the date the item is actually received.Servo Motor (in stock): I will exchange or repair a defective servo motor for up to 90 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts.Computer control unit (in stock): I will exchange or repair a defective control unit for up to 90 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts. Speed control switch (in stock): I will exchange a defective speed switch for up to 90 days. Buyer must return the the speed control switch for inspection and testing. Up to one year extended customer support: Print and keep your receipt, it could save you money.. We keep all parts in stock. That means if you brake it, we can fix it within days, not months to years waiting for parts from the large US sellers. Honesty goes a long way. If you smoked it just say so and we will fix it for you at cost. Ask lots of questions before ordering: Do not worry about missing this item and thus buying it and than changing your mind after the fact. If you miss it, we will list more within a couple days.

Price: 350 USD

Location: Haines City, Florida

End Time: 2024-10-02T17:26:25.000Z

Shipping Cost: N/A USD