2 PCS Crysta I (MICRON I) Permanant Glass Ionmer Cemennt Prevest Dental Luting

Description: CRYSTA IMICRON I HAS BEEN REBRANDED AS CRYSTA I (ONLY NAME CHANGED, REST SAME)PRODUCT DESCRIPTION Product Description : Crysta Luting is the Ideal radiopaque, self curing translucent, particleglass-ionomer luting material with excellent tooth adhesion high fluoride release and flowability, Itis useful for a wide range of clinical applications. Micron luting is available in a universal lightyellow shade in Powder and Liquid Kits. Composition Powder : Fluoro Alumina Silicate Glass Powder. Liquid : Polyacrylic Acid Liquid (Thin Viscosity) Indications 1) Cementation of metal-based inlays, onlays crowns and bridges. 2) Cementation of high strength (Zirconia based) all ceramic crowns and bridges. 3) Cementation of stainless steel Crowns 4) Attachment of metal orthodontic bands. Instructions for Use Powder/Liquid ratio (0.19/0.12), Mixing time (min. sec) : 45-60 seconds, setting time (min. sec) :2min 30sec, (at 23Â±1Â°C from start of mixing) Final finishing commencing time (after seating therestoration) : 5 min. A. Tooth Preparation 1. Prepare tooth in usual manner. For pulp capping, use calcium hydroxide paste Calcigel 2. Clean the prepared teeth with pumice and water. 3. Rinse thoroughly with water. Remove excess moisture by blotting with a cotton pellet or gentlyblowing with an oil free air. DO NOT DESICCATE. Prepared surfaces should appear moist (glistering). B. Restoration Preparation 1) Make sure that the restoration is pretreated and handled according to the manufacturerâ€™sinstructions. C. Powder and Liquid Dispensing 1) The standard powder to liquid ratio is 0.19/0.12 (1level scoop of powder to 2 drops of liquid.) 2) For accurate dispensing of powder lightly tap the bottle against the hand. Do not shake or invert. 3) Hold the liquid bottle vertically and squeeze gently. 4) Close bottle immediately after use. D. MIXING Dispense Powder and Liquid into the pad. Using the plastic spatula add all the powder to the liquid. Mix rapidly for 45-60 seconds NOTE : When mixing larger amounts, divide the powder into two equal parts. Mix the first portionwith all of liquid for 15 seconds. Incorporate the remaining portion & mix the whole thoroughly for45 seconds (Total 60 seconds). E. APPLICATIONS IMMEDIATELY apply (within 1 minute after dispensing) to the surfaces to be coated using a micro applicators, DO NOT AIR BLOW. NOTE : Should the coated surfaces be contaminated with water, blood or saliva, wash and dry thesurface and repeat the coating procedure. F. CEMENTATION 1) Coat the internal surface of the restoration with sufficient cement and seat immediately. The working time is 2 minutes from start of mixing at 23Â±1Â°C (73.40Â±1Â°F). Higher temperature shorten working time. 2) Maintain Moderate pressure. 3) Start removing excess cement when it feels rubbery. 4) Finishing can be started 4 minutes 30 seconds after seating the restoration. CONTRAINDICATION 1) Micron Luting should not be used if the patient is known to be allergic to any of the ingredient used. 2) Do not apply the material directly onto areas near the pulp or on to the exposed pulp as irritation may occur. CAUTION 1) In case of contact with oral tissue or skin, remove immediately with a sponge or cotton soaked inalcohol. Flush with water. To avoid contact, a rubber dam and/or local butter can be used to isolatethe operation field from the skin or oral tissue. 2) In case of contact with eyes flush immediately with water and seek medical attention. 3) DO NOT mix powder or liquid with component of other glass ionomer cements. 4) This product is not indicated for filling or core buildup. Storage Conditions : Store at temperature between 10Â°C to 24Â°C. Close the cap carefully afteruse. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place. Presentation Powder 15g, Liquid 10ml, 1x Spoon, 1 x Mixing Pad Disposal conditions : To be disposed off based on the prevailing rules of the country in which it is used.DISCLAIMERThe sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, please not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the itemDISCLAIMER THE SALE OF THIS ITEM MAY BE SUBJECT TO REGULATION BY THE U.S. FOOD AND DRUG ADMINISTRATION AND STATE AND LOCAL REGULATORY AGENCIES. IF SO, PLEASE NOT BID ON THIS ITEM UNLESS YOU ARE AN AUTHORIZED PURCHASER. IF THE ITEM IS SUBJECT TO FDA REGULATION, I WILL VERIFY YOUR STATUS AS AN AUTHORIZED PURCHASER OF THIS ITEM BEFORE SHIPPING OF THE ITEM.Business name Guruji venturesCity DelhiState New DelhiPhone +918527271367Contact +918527271367

Price: 16.97 USD

Location: Jersey City, New Jersey

End Time: 2024-02-05T09:08:30.000Z

Shipping Cost: 0 USD