Description: 304SS 12 Gauge Bracket for Aeromotive fuel pressure regulator: Mounts to your original mechanical fuel pump location Fits Aeromotive fuel pressure regulator PNs 13105 , 13129 , 13136 and 13220 (Also fits Aeromotive kit 13130 as that kit includes the 13129 regulator) Kit includes: - 304SS 12 Gauge Mounting bracket >> Made in the USA The 304 stainless raw material was also made in the USA The fuel pressure regulator is NOT included A block-off plate is required but is NOT included (I have a separate offer for a complete kit) Mounting hardware is NOT included (too many different options to consider) Mounts to the original mechanical fuel pump mounting points on top of a block-off plate (not included) with 1.75” bolt spacing and roughly diamond shape. Designed for the BBC style fuel pump mounting style which also seems to be common with the following (please verify your application prior to purchasing): Ford 1957 to 1986 (except 351C Cleveland / 351M Michigan casting center and 400): - 221 / 255 / 260 / 289 / 302 / 332 / 351W Windsor / 352 / 360 / 390 / 427/ 428 / 429 / 460 Chevy / Chevrolet BBC Big block Mark IV 1966 through 2000 - 396 / 402 / 427 /454 Chrysler / Dodge / Plymouth 1958 through 1991 - 273 / 318 / 340 /360 /361 / 383/ 400 /413 / 426 / 440 AMC Toyota 1941 to 1995 This offer is for a 304SS mounting bracket only for Aeromotive fuel pressure regulators (13105 / 13129 / 13136 / 13202). I do have another offer as a kit with the bracket/ a 10 gauge 304SS block-off plate and a Fel Pro. This offer is for the bracket only and does NOT include the fuel pressure regulator. Mounting bracket: The material is heavy for a bracket, 12 gauge, and is brush finished prior to bending. You will notice 2 faint lines on each side related to the bending process. You can see at least 1 of those lines in one of the photos. Depending on your preference you can polish the stainless, leave it as a brushed finish and as well the brushed finish will also accept paint. 304SS is much more corrosion resistant as compared to the often-offered chrome plain steel alternatives. Aluminum alternatives are as well susceptible to corrosion / rust but if they rust the rust will be white instead of the traditional “red” (orange/brown) rust color which is typical of plain steel. The Aeromotive regulator original bracket supplied with the regulator is not well corrosion protected and will eventually rust. The original was not designed to mount to an existing vehicle feature (too generic and would have needed adapting). The 1.75" mechanical fuel pump mounting geometry is used on so many vehicles there needed to be a bracket which would take advantage of the common design and I couldn’t find anything on the market today. The PNs listed in the interchange are PNs for some popular possible backing plates. The PNs listed are the Aeromotive regulator PNs which this bracket will fit (the regulator is NOT included). The offer includes ONLY a bracket without anything else. Your original Aeromotive fasteners will work with this bracket. The Aeromotive PN was used in the event eBay has vehicle fitment comments which would likely apply to this kit. Any questions feel free to ask. Thank you for looking! Normal 0 false false false EN-US X-NONE X-NONE
Price: 26.85 USD
Location: Middleport, New York
End Time: 2024-11-25T16:47:32.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Country/Region of Manufacture: United States
Interchange Part Number: Spectre 4247, Spectre 42473, Jegs 50596, Moroso 65394, Proform 302-290, Edelbrock 4021, Mr Gasket 1516
Type: Electrical
Manufacturer Part Number: 13105 / 13129 / 13136 / 13202
Fitment Type: Performance/Custom
Non-Domestic Product: No
Mounting Hardware Included: No
Fuel Type: Gas
Placement on Vehicle: Engine Compartment
Brand: Unbranded