Di-Acro

3/16" x 2-3/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to...

Description: Applications The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick. Environment The anchor is designed for use in a Dry environment. Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached. Hole Diameter/Bit Diameter The anchor requires a 5/32" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Driver Required A 1/4" nut driver is required for driving the anchor into the base material. Diameter of Anchor The diameter of the anchor is 3/16". Length Anchor The length of the anchor is 2-3/4" Thread Length The length of the threads on the anchor is 1-3/4" in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/4" to 1-3/4". This will ensure that the minimum embedment of 1" will be met. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/16" diameter anchor requires the hole in the fixture to be 1/4". Spacing between Anchors Each anchor must be spaced a minimum distance of 3" from each other when measured center to center. Edge Distance It is very important not to install the anchor any closer than 2-1/4" from an unsupported edge of the concrete. BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost SLOTTED HEX HEAD-Can be driven with a nut driver SELF-TAPPING-Taps threads directly into masonry and requires no other anchor DIAMOND POINT-Easier to drive the screw to save time

Price: 29.6 USD

Location: Fort Madison, Iowa

End Time: 2025-01-20T03:49:23.000Z

Shipping Cost: 0 USD

Product Images

3/16" x 2-3/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to...3/16" x 2-3/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to...3/16" x 2-3/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to...3/16" x 2-3/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to...

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Color: gray

Size: 3/16" x 2-3/4"

EAN: 0820274000274

ISBN: 0820274000274

Package Dimensions LxWxH: 5.87x4.25x2.91 Inches

Weight: 1.59 Pounds

Type: Does not apply

Brand: CONFAST

Recommended

CONFASTĀ® 3/8" Threaded Rod Anchor for Concrete, Vertical 1/4" x 1-1/2" Box of 25
CONFASTĀ® 3/8" Threaded Rod Anchor for Concrete, Vertical 1/4" x 1-1/2" Box of 25

$30.00

View Details
CONFAST 1/4" x 3" Split Drive Flat Zinc Plated 100 per Box
CONFAST 1/4" x 3" Split Drive Flat Zinc Plated 100 per Box

$48.87

View Details
50 Pack Nylon Selfdrilling Drywall/hollowwall Anchor Kit With Screws 25 Anchors
50 Pack Nylon Selfdrilling Drywall/hollowwall Anchor Kit With Screws 25 Anchors

$11.69

View Details
CONFAST 1/2" x 4-1/4" Stainless Steel Wedge Anchor (25 x 4-1/4", Silver
CONFAST 1/2" x 4-1/4" Stainless Steel Wedge Anchor (25 x 4-1/4", Silver

$67.97

View Details
CONFAST 50 Pack Nylon Self-Drilling Drywall/Hollow-Wall Anchor Kit with 25
CONFAST 50 Pack Nylon Self-Drilling Drywall/Hollow-Wall Anchor Kit with 25

$10.29

View Details
Confast Carbon Steel Flat Phillips Sleeve Anchor Zinc Plated 3/8" x 5" - SAFP385
Confast Carbon Steel Flat Phillips Sleeve Anchor Zinc Plated 3/8" x 5" - SAFP385

$1.46

View Details
10 confast concrete anchors
10 confast concrete anchors

$26.00

View Details
CONFAST 3/16" x 1-1/4" Blue Flat Phillips Concrete Diam Point Screw w/ drill BIT
CONFAST 3/16" x 1-1/4" Blue Flat Phillips Concrete Diam Point Screw w/ drill BIT

$23.95

View Details
CONFAST 3/4" x 6-1/4" Wedge Anchor Zinc Plated (Box of 20)
CONFAST 3/4" x 6-1/4" Wedge Anchor Zinc Plated (Box of 20)

$104.80

View Details
CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)
CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)

$30.00

View Details