3D Printer PLU Build Plate (Not PEI Sheet) for Bambu Lab X1C/X1/X1E/P1P/P1S/A1

Description: 【New Material PLU Build Plate, not PEI Sheet】0.5mm Spring stainless steel come with dual sided 0.125mm PLU coating sprayed then dipped in high quality polymer based coating for power adhesion to the surface. And the plate come with QR Code, the build plate position option can still be enabled.【Excellent Adhesion】PLU Sheet has better model adsorption than traditional PEI Sheet. Better solve the problems of edge warping and printing falling off. The plate can enhance the overhanging quality. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate.【No glue, no hairspray】 PLU build plate does not need to apply glue or hairspray like traditional PEI sheet, and it also has high adhesion and easy-to-remove model prints.【How to clean】 Use only water to clean the build surface. No detergent or solvents are needed. Strictly do not use IPA, Alcohol or Acetone to clean the surface. This will destroy the coating and properties and the plate may be rendered unusable.【Package Included】Doub sided spring steel sheet (PLU sheet) Compatible for Bambu Lab X1C/X1/X1E/P1P/P1S/A1 3D printers. Bambulab Compatible Flex PLU Textured Spring Steel Sheet 257mmx257mm for X1C, X1E, PIP, PIS, A1 3D PrinterVersatile: Product is compatible with many Bambulab printer models like XIC, XIE, PIP, PIS, Al models.Material : O.5MM Spring stainless steel with 0.125mm PLU coating sprayed then dipped in high quality polymer based coating for power adhesion to the surface.The QR Code has been laser etched on this coated surface and will never come off.Properties: Flexible, removable, and holds to the magnetic sticker very well. High strength and heat resistance.Quality: The flexible surface can easily be applied to all Bambulab beds making it perfect for plug and play printing.Use: Your prints in PLA, ABS, PETG adhere to the printing surface readily, easy to remove the prints, flex slightly to pop your print right off. We strongly recommend you DO NOT print using ASA,STTPU,PLA FLEX, TPU Derivative, Polymaker Polysmooth PLA/PVB, PC or NYLON on this surface.High Temp compatible: Since we have used high quality spring steel of O.5mm it can withstand thousands of heat cycles that a 3D print bed goes through from print to print without losing coating properties.Compatible Printers: All Bambulab where the Heated Bed plate measures 257.5 x 257.5 mm are compatible. Compatible with PLA/PETG/ABS only. Not Compatible with ASA,STTPU,PLA FLEX, Polysmooth PLA/PVB, Nylon and PC filament. PC or PCCF will permanently bond to the surface.Notes :1. Use only water to clean the build surface. No detergent or solvents are needed. Strictly do not use IPA, Alcohol or Acetone to clean the surface. This will destroy the coating and properties and the plate may be rendered unusable.2. Do not print ASA, Nylon, PC or PC CF or any PC blend filament on the surface. Nylon and PC will permanently fuse with the build surface rendering it useless for any further prints.3. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate.4. Keep the build plate clean with a damp cloth to prevent grease build up from touching and handling the plate during part removal.

Price: 29.99 USD

Location: Zhuhai, Guangdong

End Time: 2024-08-27T07:28:50.000Z

Shipping Cost: 3.99 USD