[3DMakerWorld] Adafruit USB Port Power Supply (AC Adapter), 5V/1A (1000mA)

Description: Key Features: 110 or 240 input, so it works in any country Clean regulated output at up to 1000mA Safe for all 5V electronics Great for use with an Arduino, Raspberry Pi, teensy, NETduino, etc. Need a USB jack for charging or powering a project, but don't want to lug around a computer? This adapter was specifically designed to provide 5.25V not 5V, but we still call it a 5V USB adapter. We did this on purpose to solve a problem that occurs often with USB-powered gadgets: they draw so much current than the resistance of the cable causes a voltage drop, so instead of 5V, the device sees 4.75V or so. This is because the USB power specification allows up to 5.25V and has the benefit of making up for any loss due to thin USB cables. Basically, you can use it where ever USB 5V power is needed, with no risk of damage, and it will happily work at the full current range, no matter what cable you use! The adapter does not have a cable, instead there is a USB 'A' type port on the bottom, where you can plug any USB cable in. The data lines have resistors on them, to match what is inside of an smartphone type charger. Also good with our Lithium-polymer battery chargers, so you can just carry a USB cable. This particular adapter is very nice, with a red indicator LED to let you know its working Item Specifics Plugs: US 2-prong Does not include a USB cable Port: USB "A"

Price: 9.9 USD

Location: Lenexa, Kansas

End Time: 2024-11-24T20:44:05.000Z

Shipping Cost: N/A USD