3M Engineer Grade Reflective Tape Roughly 1" x 25 ft REJECTS

Description: BLEMISHED OR IRREGULAR ROLLS3M™ 3200 series Engineer Grade Reflective Vinyl is the best quality reflective material you can get. The adhesive is permanent; do not expect to easily peal this pinstriping off once it is installed. In the unfortunate event that the product does need to be removed it will take a heat gun and some good old fashioned elbow grease to get it off.3M™ 3200 series Engineer Grade Reflective Vinyl does not have a vehicle grade adhesive and is not made for use on vehicles.APPROXIMATELY 1" tall (at least 7/8" and at most 1 1/4") by 25 feet long. MANY OF THESE ROLLS ARE ROLLS COME FROM THE FACTORY EDGE OF THE REFLECTIVE MATERIAL.THE ROLLS MAY BE DAMAGED ON THE EDGE, SCUFFED OR CRACKED IN SOME AREAS. THE ROLLS MAY VARY IN WIDTH Between 7/8" and 1 1/4" X 25'BLEMISHED OR IRREGULAR ROLLSIt will come on a roll APPROXIMATELY 1" tall (at least 7/8" and at most 1 1/4") by 25 feet long. This is 3M ™ Engineer Grade Reflective Vinyl. ONLY $9.50 per roll With FREE SHIPPING US MAIL! 3M 3200 is Available in five colors, White, Yellow, Blue, Green and Red. Orange is 3M CW803M™ 3200 series Engineer Grade Reflective Vinyl has an outdoor life expectancy of 5-7 years. 3M CW80 Orange Engineer Grade Reflective Vinyl has an outdoor life expectancy of 2-3 years. 3M™ 3200 series Engineer Grade Reflective Vinyl is the best quality reflective material you can get. The adhesive is permanent; do not expect to easily peal this pinstriping off once it is installed. In the unfortunate event that the product does need to be removed it will take a heat gun and some good old fashioned elbow grease to get it off. 3M™ 3200 series Engineer Grade Reflective Vinyl is a highly durable adhesive coated opaque sheeting. Engineer Grade Sheeting remains brilliantly reflective even when totally wet by rain. It also retains its reflectivity when viewed at wide entrance angles. Resists heat, cold, water, mild acids, alkalis and salts White permanent adhesive 78# liner Semi-conformable to flat & slightly curved surfaces Meets or exceeds Federal Specifications; L-S 300C (Reflectivity 1) FP-85 (Type II) Not recommended for vehicles with rivets

Price: 9.5 USD

Location: Mammoth Spring, Arkansas

End Time: 2024-08-24T18:28:55.000Z

Shipping Cost: 0 USD