7 X 14 Mini Metal Lathe 1.2 HP Servo Motor 115 V 900 Watt Kit upgrade conversion

Description: 2024 Upgraded 1.2 HP 900 Watt Computer Controller and Matching Servo Motor. Includes our new 2024 control unit with:Reverse on the fly.Thermal overload protection.Software based jam protection.Adjustable brake.Adjustable soft start.Power outage protection. (Will not restart while you are away)Emergency E_Stop (adjustable between coast and immediate)10 RPM speed increments. (the competition is 100 RPM increments) See image 1 for whats in the box.All other images are for information only. Only for Spindle Drive 7 X 14 Mini Lathe. Does not fit 8 X 14 lathes. Does not fit 2 speed mini lathes. Make note: These are 900 watt systems, not 750 watt systems. the difference is more low end HP and less high speed RPM's. Contact me and ask before you buy. Fits Many Mini Metal Lathes.Sold complete with all the adapters required to install in the original motor location of your spindle drive mini metal lathe. Allows for complete reinstall of all threading gears and auto feed systems. Each one is custom built when you order. When the build is complete, it will be tested for 20 minuets. Any defects found during testing will require a complete new build. This insures you do not have to deal with returns and exchanges due to manufacturer defects. All parts required to build are In stock items. T In stock: Built with the new designs for 2024. Fits mini metal lathes that the drive belt goes directly to the spindle gear. Does not fit mini metal lathes that have an intermediate shaft (high/low gear). To fit these you would need to purchase one of my systems designed for two speeds as seen by eBay listing's: 750W 2 speed - 185240421319 or 900W - 2 speed 185546221294 Note: Most individual parts, timing belt with timing gears, spacers and adapters are available separately. Motor mount is not sold separately so if you plan to use a Vevor, you will have to weld your own. Instead, see my other listings for a complete kit. The horsepower improvement is incredible. Kinda like replacing the small block with a big block in your Mustang/Camaro muscle car. Just pure power, so much so that you will never use all of it. This system provides full power at any speed and that includes Spindle RPM's as low as 200 RPM's Motor and spindle speeds + Reverse: The motor speed can be programmed and or full range can be achieved with just the speed control lever: Speed control programming only requires a few easy steps. Reverse is simple, just hold the yellow button for a few seconds. Programming includes the ability to set bottom and top RPM range separately. In other words you can program the system to run the spindle at any speed or range of speeds you choose (see below). Slowest speed achievable: Motor 100 RPM = Spindle 60 RPM. Highest speed this one produced: Motor 3,500 RPM = Spindle just over 2,000 RPM's. Note: it is not recommended to spin the spindle any faster unless you upgrade the factory installed spindle bearings. Motor Specifications:Watt: 900 watt (1.2 HP)Voltage: 110VHZ: 60Torque: 11 N.M.RPM: 200 to 3,500 RPM in 10 RPM increments. Note: Manufacturer recommended 300 to 3,000 RPMs My personal testing results: This motor runs best between 300 and 3,300 RPMs. See it (prototype 1) running, disassembly and programming on You Tube search for: "Mini Metal Lathe 1 HP Servo Motor 750 Watt Computer controlled with threading and gears" Same username The Custom Crafter. System includes: Control unit comes fully programed for your systemA new 900 watt motor like the one seen here in photos above and on you-tube. Motor will come with the motor mount installed. This will require adjustment to fit your lathe. It will also come with the small timing pulley installed on it using a 5 mm key-way and main shaft nut. A new 2024 control computer like the one seen in the above photos. This control unit is built by The Custom Crafter. The Custom Crafter made in the USA motor mount. (installed on motor, see line 1). Includes thick washers and grade 8 nuts.The Custom Crafter made in USA spindle bearing head adapter (see photos).The Custom Crafter made in USA spindle spacer (see photos).One custom made polished and anodized aluminum spindle timing pulley (see photos).One custom made polished and anodized aluminum motor timing pulley (see photos). Comes preinstalled on motor (see line 1).A new L050 1/2" wide timing belt.Access to on line active programming instructions and fault codes in plain English and written by us.. Includes recommended programming settings and fault codes.The Custom Crafter quick program and spindle speed card.Package will include a link to video assembly instructions. This will include a text number for direct assistance from the custom Crafter.Assembly requires some technical skill to include minor machine work. Note: Check the photos in this listing. See the red lathe. If your lathe has holes instead of the normal slots, this motor will not fit without your ability to slot the cast iron lathe bed. Additionally if you return this item for this reason, you will pay shipping both ways.You will have to cut the die-cast gear housing to allow additional room for the larger timing belt. (see photos) this can be done with a hacksaw and a file but a pneumatic cut off tool or die grinder will ease this job.A spreader wrench is a big help but this can be managed with a hammer and punch.You will need metric and domestic allen wrenches + a 13mm/1/2" deep socket and ratchet.Some longer allen head metric allen head bolts (not included) may also be required, especially it you over tighten and strip the factory bolts provided with your machine.Notes:This system has so much more power that it becomes tempting to see just how much you can cut in a single pass. Do not do this because the rest of the mini lathe is not built strong/stable enough for this kind of abuse. If you jam it, you may damage the lathe to include broken cutters, parts and the control unit.This is abuse and no refunds will be issued for damage caused by abuse.All lathes are dangerous, increasing the horsepower increases this danger. It is your responsibility to insure fit and proper application. We make no guarantee of safety, application or that this product is suitable for your intended use.Our liability is limited to the purchase price of this item.Recent Feedback: If you have a mini lathe this is the best upgrade for the money by far.Great Kit A+.I love it great product and support.Mini Metal Lathe 1 HP Servo Motor 115 V 750 Watt Kit Fits Original Location Gear. Awesome product, crazy power output, thanks!took me about an hour to install I still have to make a mount for the controller. what a amazing enhancement to my lathe. Dan is a stand-up man, he had it shipped out to me ASAP I had it in 3 days. the power is incredible. thank you very much for your time invested with developing a product for a very fair price that is an amazing enhancement.Shipping: Due to weight it is best to ship USPS priority large flat rate box and to USA only. $5.50 shipping insurance will be added to the order. Returns:Buyer has 10 days from the time he/she receives this item as shown by tracking to request a return authorization.Seller usually responds in under 24 hours + buyer will have sellers text only phone number.Buyer has 10 days ship time to have the return at the sellers address. 10 day period starts when seller issues the return authorization.Seller will inspect returned system and if it passes, seller will issue a refund of the purchase price less shipping. (buyer pays shipping both ways)Main components have a unique internal water soluble identification mark. No refund will be issued if it is missing.All original parts and packaging must be returned to get a refund.No return authorizations will be issued after the 10 day period.Limited 60 day parts warranty. Labor is buyers responsibility: See details, what's covered and for how long etc below. Shipping both ways for all parts returned for warranty is the buyers responsibility. Parts returned will be inspected for unique identification mark and or abuse. If found to be abuse or missing the identity mark, no warranty exchange part will be provided and buyer will be required to pay shipping to get their parts back. Warranty exchange parts may or may not be new but instead refurbished or demos that I have from previous builds. Warranty exchange can take up to 60 days as some parts may not be in stock and require ordering from overseas. Warranty starts on the day eBay records the system as paid and not the date the item is actually received.Servo Motor. - I will exchange a defective servo motor for up to 60 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts.Computer control unit. - I will exchange a defective control unit for up to 60 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts. Timing pulleys, motor mount and aluminum adapters. - I will exchange or replace these items at no cost or limited cost to buyer as follows. Buyer will be asked to provide photos. If photos are accepted seller will ship replacement parts at no cost to buyer. If photos are not accepted seller will ask buyer to return parts at buyers expense for inspection before seller warranties these parts. Timing belt and small parts are not covered. Customer alterations and machine work are not covered and may void the above warranty. After warranty support: There is nothing worse then having an expensive item break 2 days after the warranty expires. Please contact me because as long as there is no abuse, I will offer a solution. This often includes parts at cost and free installation. That is as long as you communicate and pay shipping both ways. I will also provide the same service to repair your system for up to a year. Just return it with an honest answer as to why it failed, to include things like I jammed it and smoked it. I will fix it for you at my cost for parts. Yes, I keep control boards in stock for this reason. I also keep motors, belts and every part used to build these in stock. Just contact me and we will have you up and running within days, not 6 months waiting for parts from China. Ask questions before ordering: Do not worry about missing this item. I am in the process of building several more. Also as I build them, they are improved as I never cut corners to save penny's.

Price: 339 USD

Location: Haines City, Florida

End Time: 2024-08-17T12:54:45.000Z

Shipping Cost: 28 USD