73-87 GM front suspension shackle hanger with HD Shackles

Description: 73-87 GM front suspension shackle hanger with HD Shackles Replace and improve those stock shackle hangers with a set of these beefy ones! Applications 1973-1987 (88,90,91) GM Truck and SUV What is the front shackle hanger? On a truck that uses leaf springs for the front suspension there are two points where the spring is connected to the frame, a fixed point and a pivoting point with a shackle. On these trucks the fixed point is at the front of the spring (by the bumper) and the shackle point is at the rear of the spring. The Hogback fab shackle hanger replaces that wimpy stock one with a much beefier unit! What are the benefits of the Hogback Fab front shackle hanger? The stock shackle hanger uses a tiny bolt and tiny bushing, it is very common for them to come apart prematurely and for the suspension to start wearing a grove through the stock bracket. This later results in the leaf spring hitting the frame. The Hogback fab front shackle hanger isn't only beefier metal wise but it uses a larger 1.5" diameter bushing and 9/16" grade 8 bolt!! Talk about strength! *Same as original width, no spacers needed!! Can this front shackle hanger be used for a 2wd to 4wd conversion? Sure can! Just need to drill some holes for the bolts to pass through and hole saw a place for the bushing to pass. What is the front HD shackle kit? On your front suspension there are two points that connect your leaf spring to the frame, a fixed point at the front and a shackle at the rear. This kit replaces the shackle end of your truck. What are the benefits of the front HD shackle kit? The suspension of these trucks sees a whole lot of abuse, from off road to towing. Even street driven trucks can make the weak factory hardware break. The stock stuff just doesn't cut it, that is where our HD shackle kit comes in. With this replacement you will have peace of mind that your truck can handle any task! The factory bolts are 7/16", with this kit we go with burly 9/16" and 1/2" grade 8 bolts! Strength where you need it most! All Grade 8 hardware Urethane bushings No Grease channels to weaken bolts (grease zerks are nothing more than a gimmick, they never take grease and pop off under small amounts of pressure) 3/8" Thick shackle plates that are powder coated black Shackle pates 1" longer than stock to keep springs from hitting frame under flex (results in 1/2" of lift) How easy is it to install the Hogback Fab front shackle hanger? Very easy! Safely lift/jack truck up and put on jack stands. Make sure to use proper safety gear and equipment Locate front shackle hanger and remove leaf spring and shackle plates from it Remove rivets holding the stock front shackle hanger on frame. This can be done super fast with an air chisel. Another method is using a cutoff wheel to cut an X in the rivet. Then take a hand chisel to the heads to remove them. Once the stock hanger is removed the hole where the bushing passes through the frame will need to be opened up. This can be done with a few passes with a die grinder or dremel too. Bolt in front shackle hanger and torque bolts to 38 FT/LBS. Bolt in leaf spring and shackle plates to front shackle hanger. The rest is reverse of removal. After driving 100 miles make sure to re-torque bolts HOG TIP: Want a stronger front main eye for 73-80 or doing a 4x4 conversion? Check this out HERE 73-87 GM front suspension shackle hanger with HD Shackles Replace and improve those stock shackle hangers with a set of these beefy ones! Applications 1973-1987 (88,90,91) GM Truck and SUV What is the front shackle hanger? On a truck that uses leaf springs for the front suspension there are two points where the spring is connected to the frame, a fixed point and a pivoting point with a shackle. On these trucks the fixed point is at the front of the spring (by the bumper) and the shackle point is at the rear of the spring. The Hogback fab shackle hanger replaces that wimpy stock one with a much beefier unit! What are the benefits of the Hogback Fab front shackle hanger? The stock shackle hanger uses a tiny bolt and tiny bushing, it is very common for them to come apart prematurely and for the suspension to start wearing a grove through the stock bracket. This later results in the leaf spring hitting the frame. The Hogback fab front shackle hanger isn't only beefier metal wise but it uses a larger 1.5" diameter bushing and 9/16" grade 8 bolt!! Talk about strength! *Same as original width, no spacers needed!! Can this front shackle hanger be uséd for a 2wd to 4wd conversion? Sure can! Just need to drill some holes for the bolts to pass through and hole saw a place for the bushing to pass. What is the front HD shackle kit? On your front suspension there are two points that connect your leaf spring to the frame, a fixed point at the front and a shackle at the rear. This kit replaces the shackle end of your truck. What are the benefits of the front HD shackle kit? The suspension of these trucks sees a whole lot of abuse, from off road to towing. Even street driven trucks can make the weak factory hardware break. The stock stuff just doesn't cut it, that is where our HD shackle kit comes in. With this replacement you will have peace of mind that your truck can handle any task! The factory bolts are 7/16", with this kit we go with burly 9/16" and 1/2" grade 8 bolts! Strength where you need it most! All Grade 8 hardware Urethane bushings No Grease channels to weaken bolts (grease zerks are nothing more than a gimmick, they never take grease and pop off under small amounts of pressure) 3/8" Thick shackle plates that are powder coated black Shackle pates 1" longer than stock to keep springs from hitting frame under flex (results in 1/2" of lift) How easy is it to install the Hogback Fab front shackle hanger? Very easy! Safely lift/jack truck up and put on jack stands. Make sure to use proper safety gear and equipment Locate front shackle hanger and remove leaf spring and shackle plates from it Remove rivets holding the stock front shackle hanger on frame. This can be done super fast with an air chisel. Another method is using a cutoff wheel to cut an X in the rivet. Then take a hand chisel to the heads to remove them. Once the stock hanger is removed the hole where the bushing passes through the frame will need to be opened up. This can be done with a few passes with a die grinder or dremel too. Bolt in front shackle hanger and torque bolts to 38 FT/LBS. Bolt in leaf spring and shackle plates to front shackle hanger. The rest is reverse of removal. After driving 100 miles make sure to re-torque bolts HOG TIP: Want a stronger front main eye for 73-80 or doing a 4x4 conversion? Check this out HERE × × × × × Buy now and save! Tell a friend Watch now Postage info Click the Postage tab above the listing description for more info Price: $16.00 (local shipping) Click the Postage tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like 3 inch wide axle relocation plates, 7/16 Inch Center Pin 3 inch wide axle relocation plates, 1/2 Inch Center Pin 1999-2019 GM 1500 5" shackle reversal 73-80 GM front main eye hanger Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © hogbackfab Postage Shipping is a flat rate across US at a rate of $16.00 Payment Accepted Payment Methods PayPal Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 277.95 USD

Location: Silt, Colorado

End Time: 2024-11-19T02:36:50.000Z

Shipping Cost: 16 USD