8051 Development MCU + STM32 ARM Cortex-M3 Development Board 2in1

Description: 51 Development MCU + STM32 ARM Cortex-M3 Development Board 2in1 2.6″ Touch Color Screen Support AVR Description: The ARM STM32 and 8051 MCU perfect compatibility combine , which can be regarded as a professional STM32 development board, also can be regarded as a professional 8051 MCU development board, they will bring you new learning experience. Specfications: 1. Use STM32F103C8T6, CPU working frequency can reach 72M,and 1.25 DMIPS/MHZ - 0 waiting for access memorizer - single cycle hardware multiplication and division - 64KB Flash - 20KB SRAM - clock,reset and power management - 0 to 3.6V power supply and the I/O base pin - power on/power down reset (POR/PDR), Programmable voltage monitor (PVD) - embedded 4 to 16 MHz high-speed crystal oscillator - embedded 8 MHz RC oscillator - internal 40kHz RC oscillator - PLL supply CPU clock - 32 kHz RTC oscillator with calibration - low-power dissipation (A: 3 kinds of energy saving mode: sleep, stop and standby mode; B:VBAT power supply for the RTC and spare register) - debug mode: serial line debugging (SWD) and JTAG debugging interface - DMA controller - 7 channel DMA controller - Support peripheral: timer, ADC, SPI, I2C and USART - one of 12-bit A/D converter, 1 us the conversion time (16 channel) - 17. as many as 80 fast I/O port - 26/37/51/80 one of multi-function two-way 5 V compatible I/O port - All the I/O interface can image to 16 external interruption - as many as seven timer - As many as three 16-bit timer, each timer has up to four for input/output compare/PWM or pulse count channel - 16-bit 6 channel advanced control timer A , as many as six road PWM output B, dead zone control, edge/middle alignment waveform and emergency braking - Two 16-bit the watchdog timer (independent and window type) system time timer: 24 bits from minus type - as many as nine communication interface - two I2C interface (SMBus/PMBus) - 3 USART interface, support ISO7816, LIN, IrDA interface and demodulation control - two SPI synchronous serial interface (18 M/SEC) - CAN interface (2.0 B active) - USB2.0 interface at full speed - 20, 2 of 12 A/D converter, 1 us the conversion time (16 channel) - Conversion range: 0 to 3.6 V - Double sampling keep function - The temperature sensor (STM32 cabin temperature sensor) 2. 8051 MCU - Use STC90C516RD Package including: - main board × 1 - Include on the main board: - STC 90C516RD - Clock battery - two-tone 8 * 8 dot matrix - 12M Crystal Oscillator - IR receiver -18B20 Temperature Sensor - Photosensitive thermosensitive module - Multi-function folding box × 1 - stepper motor × 1 - DC motor × 1 - IR Remote Controller × 1 Cable include: - USB cable × 1 - 8 pin flat cable × 4 - dupont line × 8 - 11.0592 MHz Crystal Oscillator × 1 - Spare short circuit cap × 4 - 2.6" TFT LCD Color Screen ( SD card integration module) × 1 - STM32 core board × 1- DVD

Price: 100 USD

Location: Bucharest, Sector 1

End Time: 2024-09-19T14:25:16.000Z

Shipping Cost: 15 USD