Description: Visit storeItems for saleAbout usProduct DetailsProduct Features:18650 lithium spot welder, can weld 0.1-0.3mm, support 0.1-0.3mm thick nickel strip or steel stripSupport Faraday capacitor, battery, welding solid12 original MOS tubes, spot welding peak current up to 3600A3 pulses, 99 levels of adjustment, simple operation and good effectElectrical conductivity and heat dissipation, can work continuously for a long time This version has a fan interface, when the temperature exceeds 45 degrees openThe main board has a fixed button and display, easy to adjustDouble-sided out of the line, easy to spot welding, the product is marked, not easy to connect the wrong, wider voltage wide selection of power supply welding more firmly and more widelyProduct parameters:Product name: 18650 lithium spot welderWorking voltage: 6.5V-16VWorking current:<20maStandby power consumption:<0.5maRecommended use temperature:-10-60℃Welding peak current:3600A MAXDisplay language: Chinese and English can be switched: (press "-+" at the same time)Welding mode: default automatic welding modeWeld nickel thickness: 0.1-0.3mm (related to the battery discharge energy)Product size:120*96mm *14mm Instructions for use.2.7V3000F Faraday capacitor two in series, when the charging voltage reaches 4.5V can be used. The highest gear adjustment section is 99 according to the thickness of the welded nickel sheet and the solidity of the weld in the "section" set the appropriate value.Battery power supply.12V20AH~12V65AH. Note that when the battery capacity is larger, the stronger the discharge capacity, the new battery is stronger than the old battery discharge capacity. Therefore, we do not allow the capacity and the new degree of battery to choose the appropriate gear, it is recommended that the "- paragraph" when the first test do not adjust the gear too large, generally adjusted to 10 first spot welding a Bian to see the welding effect, according to the welding effect slowly upwards Attention:This product requires your own power supply, system voltage: 6.5V-16V, working current: 100-900A, support 12V 20AH ~ 12V 65AH. power supply equipment working current of about 100A ~ 900A, support 0.1-0.3mm nickel-plated sheet welding.Common working power supply in the market.30Ah-35Ah capacity type 18650 battery pack12V car starter power supply2S/3S/4S model airplane lithium battery pack3 string high rate lithium battery pack2.7V 3000F Faraday capacitor two in series12V-14.6V lead-acid battery12V 30-65A good performance lead-acid bottleHigh rate lithium iron phosphate batteries Connection notes:1. Connect the positive and negative battery poles according to the product connection schematic.2. The soldering pen as well as the battery connection wire should be locked with a set screw so as not to lead to fire, welding is not secure. Caution.When we do not know the external Faraday capacitor or battery on the discharge capacity, please do not adjust the value of a large. Prevent excessive current damage to the field tube. Our products will be strictly tested before delivery, the product will cause unforeseen failures due to improper operation. So please be careful when using the operation, do not follow their own feelings go haphazardly use. Product list:1* Spot welder2* Spot welding pen1* Negative wire1* Screw accessoriesPayment MethodShipping PolicyFeedbackPayment Method Payment must be received in 5 business days of auction closing. Please leave note for your special request (e.g. Colors or Size) when you pay the order. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. Shipping Policy 1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand. 2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders. 3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.Feedback We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Price: 42.12 USD
Location: Jamaica, New York
End Time: 2024-09-05T05:37:52.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Brand: Unbranded
MPN: Does not apply
Welder Type: Battery Spot Welder
UPC: Does not apply
EAN: Does not apply
