9pc Turbo Boost System Leak Tester Tool Kit Turbocharger Pressure Leakage Tester

Description: 🔧【Pressure Gauge Tester】Autory turbo system air pressure leakage tester set comes with a 0-6bar (0-87psi) gauge to accurately measure the pressure inside the hose, and includes a pressure regulator that means lock when you press it, so you need to pull it up and turn it when you need to adjust the pressure. There is also a red manual valve to control the air pressure on and off; if the pressure is too high, you can pull the red overpressure relief valve to lower the air pressure. 🔧【Easy troubleshooting】Autory turbo boost leak tester kit is specially design to check turbo system leaks or cooling systems pipe, Fuel pressure testershelp you easy to troubleshoot turbo leak and find the leak location. Plug the intake and exhaust with plugs, connect the plugs to the air compressor with a regulator and pressurize the turbo system, once pressurized you can see if the dash maintains pressure and hear any leaks. 🔧【Wide Applications】This turbo system pressure leakage tester kit is equipped with 4 pairs stepped adapters for plugging the intake and exhaust pipes. The multiple sizes allow for fitting several size hoses, which can work on 1.38''-3.54'' diameter hose. Detailed dimensions are 35, 40, 45 mm (1.38'', 1.57'', 1.77''); 50, 55, 60 mm (1.97'', 2.17'', 2.36''); 65, 70, 75 mm (2.56'', 2.76'', 2.95''); 80, 85, 90 mm (3.15'', 3.35'', 3.54''). 🔧【Why Need This Fuel Pressure Testers】Autory turbo charger air system pressure leakage tester kit will help you charge the turbo system with a low pressure regulated shop main air source to indicate the presence of leaks within the system, it can also be used to cool the system hoses. Our turbo system pressure leakage tester kit is easy to use and will save you valuable time and money. 🔧【What U Get】This turbo system leakage tester set includes 9 Pieces: Pressure Gauge with a shut off ball valve, a pressure release valve, air coupling and European type air inlet and 4 pairs of stepped Adapters(35mm - 90mm), all in a plastic suitcase. 🔧【Warm Tips】Best to use with an air compressor with a holding tank; not over pressurization, because over pressurization can damage the components of the engine. IMPORTANT! Regulate air pressure in tester to 25psi maximum. Refer to manufacturer’s manual relating to the maximum air pressure of the turbo charger air system pressure leakage diagnosis tester tool set or other system being tested. Size 11.38'', 1.57'', 1.77''(35, 40, 45 mm) Size 21.97'', 2.17'', 2.36''(50, 55, 60 mm) Size 32.56'', 2.76'', 2.95''(65, 70, 75 mm) Size 43.15'', 3.35'', 3.54''(80, 85, 90 mm)

Price: 89.99 USD

Location: Shen Zhen

End Time: 2023-09-27T09:26:29.000Z

Shipping Cost: 0 USD