Cassette Seal (Statim 2000)

Description: Cassette Seal (Statim 2000) Replacement cassette seal fits the cassette lid and compatible with the Statim 2000 sterilizer. Product Details: Dimensions: 7-3/4" x 11-3/4" Material: black silicone OEM #01-100028S Installation Instructions of Statim 2000 Cassette Seal (PDF): Open, cool, and separate cassette before removing the seal. Place the side of the cassette with the seal on a flat surface. Begin with any of the 4 corners to pry the cassette seal loose using a gasket removal tool (#DG-100). Pry the seal away from the cassette tray. Do NOT poke the seal directly. Position the tool between gasket and tray. Remove the seal by pulling down and out at the same time, until removed from the cassette housing. After the seal is removed, then inspect, clean, and remove any residue in the cassette housing groove. Examine for dings or dents in the housing groove on both halves of the cassette. With the new seal in hand, lubricate the outer edge that will come in contact with the cassette housing groove with provided liquid soap. Now install the cassette seal by placing the seal in the back corners first so the 2 holes line up between the gasket and cassette tray. Continue installing each of the 4 corners by making sure the two locating tabs are at the edge of the lip on the cassette tray. Install the cassette seal into the groove (first the top and then the bottom) - making sure the corners are still located correctly and the locating tabs are still properly visable. Remove any soap residue from the holes in the cassette, because this could cause leakage if not clean. Finally cycle the unit for steam leaks and insure pressurization. NOTE: During the test cycles it is normal to hear a hissing sound at first. The sound is from excess soap expelling and the cassette seal seating in the metal cassette housing tray. TECH TIP: If steam leaks or pressurization does not occur, seal may be damaged from installation or improperly installed. Refer to the operator’s manual. NOTE: For a maintenance kit, see #SM-64. Cassette Seal (Statim 2000) Replacement cassette seal fits the cassette lid and compatible with the Statim 2000 sterilizer. Product Details: Dimensions: 7-3/4" x 11-3/4" Material: black silicone OEM #01-100028S Installation Instructions of Statim 2000 Cassette Seal (PDF): Open, cool, and separate cassette before removing the seal. Place the side of the cassette with the seal on a flat surface. Begin with any of the 4 corners to pry the cassette seal loose using a gasket removal tool (#DG-100). Pry the seal away from the cassette tray. Do NOT poke the seal directly. Position the tool between gasket and tray. Remove the seal by pulling down and out at the same time, until removed from the cassette housing. After the seal is removed, then inspect, clean, and remove any residue in the cassette housing groove. Examine for dings or dents in the housing groove on both halves of the cassette. With the new seal in hand, lubricate the outer edge that will come in contact with the cassette housing groove with provided liquid soap. Now install the cassette seal by placing the seal in the back corners first so the 2 holes line up between the gasket and cassette tray. Continue installing each of the 4 corners by making sure the two locating tabs are at the edge of the lip on the cassette tray. Install the cassette seal into the groove (first the top and then the bottom) - making sure the corners are still located correctly and the locating tabs are still properly visable. Remove any soap residue from the holes in the cassette, because this could cause leakage if not clean. Finally cycle the unit for steam leaks and insure pressurization. NOTE: During the test cycles it is normal to hear a hissing sound at first. The sound is from excess soap expelling and the cassette seal seating in the metal cassette housing tray. TECH TIP: If steam leaks or pressurization does not occur, seal may be damaged from installation or improperly installed. Refer to the operator’s manual. NOTE: For a maintenance kit, see #SM-64. × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Standard Dental Operatory Light High Grade Glass Reflector Removable Lens Shield ECO II & II+ Amalgam Separator Cartridge The Simple One Chairside Amalgam Separator O-rings (10) Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © American Dental Accessories, Inc. Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 74.2 USD

Location: Minneapolis, Minnesota

End Time: 2024-09-10T17:06:43.000Z

Shipping Cost: 0 USD