CR-C Multi Function Common Rail Injector Tester Tool Injector Tester

Description: NEW CR-C Multi function common rail injector tester tool Product type:CR-C multi function of common rail injector tester Test range: the atomization effect,pre injection,the discharge point,full load point. Suitable for:Bosch,Delphi,Denso,domestic and common type Power supply:AC110-240V Working temperature:-30 degrees Celsius—70 degrees Celsius Dimensions:110*250*190(millimeter) The adjustable pulse width:10MS Adjustable frequency:30HZ Operator Interface LCD screen: The upper left corner of the instrument is used to display the frequency pulse width value. Indicator light: to show current status and drive mode. Function key: to run or stop—to turn on and off the signal output. Drive mode—Select the drive mode by the left and right keys. MS knob: to adjust pulse width. HZ knob: to adjust frequency. Signal outlet: to connect injector harness. Power supply: to turn on and off the main power Operational Method 1. The common rail injector is directly connected or loaded into the clamp and connected to the common hand pressure calibrator. 2. Select the appropriate plug according to the injector brand and then connect the wiring harness to the injector. 3. According to the injector brand, select the corresponding drive mode. At this time, you can hear the injector solenoid valve suction armature "pa,pa" sound. 4. Provide the proper injection pressure by continuously lowering the lever of the calibrator. The general pressure value is 30-40MPA, and the atomization performance of the injector can be observed at this time.

Price: 103.99 USD

Location: shenzhen

End Time: 2025-01-07T23:01:24.000Z

Shipping Cost: 71 USD