Custom Built TOFU 60% Lubed NK Creams, Durock Stabs, Brass Plate & Neoprene Foam

Description: Custom Built Dark Purple Aluminum TOFU 60% Lubed NK Creams, Durock Stabs, Brass Plate & Neoprene Foam. Features: Broken-In Cream switches (~10,000 actuations before lubing) for maximum smoothness, hand lubed w/Krytox 205g0Durock v2 screw-in stabilizers, housing + wire entirely lubed with Krytox 205g0 (expect minor ticking) DZ60RGB Hotswap PCB (~5 swaps in)Custom mounted w/4 o-rings under the pcb, screwed in at the two outer standoffsFull brass plateFour layers of 1/16th in. thick neoprene foam under the pcb to improve keyboard acoustics. There's also foam between the pcb and plate, provided by KBDFans. These are all non-adhesive and removable.10 ft. braided purple USB-C cable to match the case.Full AKKO Neon Keycap setExtras:- KBDFANS Felt Carrying Case- Extra Screws- Extra O-Rings- 2 extra switches- Set of ~100 Gold Plated 63.5g Durock Springs This keyboard has seen ~1 week of use. Everything works perfectly, and the pcb is VIA compatible. The external appearance is still perfect, no scratches on the entire appearance. Expect minor defects within the internal appearance of the case. The board was built o-ring mounted to provide a slightly softer and even typing experience. Note: Do NOT hold the ESC key while plugging in the keyboard! This will reset keybinds to stock. If this happens, unplug the keyboard and wait at least 30 seconds before plugging it back in. Everything should work perfectly fine and you can reprogram certain keys using the VIA software.

Price: 500 USD

Location: Tracy, California

End Time: 2023-10-16T23:20:17.000Z

Shipping Cost: 25 USD