Description: Return Policy: eBay has recently instituted a minimum return policy of 30 Days (to be considered a "Top Seller") which for used and very often vintage equipment is, in my opinion, too long. And all I sell is used and vintage equipment. I've checked the "No Returns Accepted" box for every item I am offering for sale but that doesn't mean I won't stand behind what I'm selling. Unless otherwise stated every item will come with a 7 day return privilege from the day you receive it. This is something that I did way back when, well before eBay got around to instituting a return policy. And if I've made a mistake (I do on rare occasions) and it is not as described I will also pay for the return shipping. The buyer shouldn't have to pay for my mistakes. However, if you've purchased an item in error (e.g. an FD Canon manual focus lens to use on your EF mount autofocus digital body) or had a change of heart and no longer want the item within the first 7 Days then you're going to pay the return shipping as I shouldn't have to pay for your mistakes or post-purchase decisions. That seems fair to me. I will also offer warranties of 30 Days or more on certain items. Expect to see that with more user oriented items than with collector oriented items. Di-Acro No.2 Punch Press Set Hello and thanks for looking. Listing is for a massive Diacro punch set up consisting of a manual No.2 Punch on original stand, a power No.2 Punch (runs on 110v) with base cabinet, 325+ complete punch and die sets plus a few extra unpaired punches and dies all housed in a pair of cabinets mounted on a rolling base. There are four die holders: 2x Diacro Style A (one plain, one with 1/4-20 tapped holes in a grid pattern), one Style B and one Style C. There are multiple adapters (at least two) to use smaller dies in the larger holders and multiple adapters to utilize smaller (1/2” diameter shaft) in either punch press. There are some spare parts for the presses as well. There are countless numbered round and fractional round from pinhole up to 2”, there are 14 square sets, 20+ rectangular sets, lots of oblongs and Ds, plus odd shapes and a bunch of brass sets (square, rectangular, round and other). There are at least two corner rounding sets as well. Many of the punches and dies have W insignias for Whitney. Many are unmarked. I don’t know who made the brass stuff. I bought the set used and have only ever used maybe 20 or so of the punches and dies a handful of times. A few common sizes I’ve used quite a bit (on aluminum 98% of the time) and they all still cut cleanly. I’m sure a good many of the sets have never been used (more on that below). Some have a little surface rust. Nothing crazy. Note that the power punch is structured a little differently with a machined block of aluminum under the die holder bringing it to the proper height. I’m not sure why it was made this way but i’ve seen at least one other online made the same way. I acquired the two punches separately. The manual punch came from a fellow whose friend had bought it new (in the 90s) along with most of the cabinet full of punches and dies but never fully utilized it. It’s all in really great shape and you can see that it wasn’t used much. I was told he picked up the brass stuff separately. I picked up the power punch as a mate because I already had so much tooling. (How could I resist?) It’s been used a good bit (before me), is probably from the 1950s or 60s and still works fine. it weighs somewhere around 800lbs. The manual punch on stand is somewhere around 400lbs. And the punches, dies and extras (including the rolling double cabinet) I would have to guess is around 500lbs or more. I can load onto your truck or trailer. If buyer arranges freight shipping I can secure onto a pallet (or two if necessary) and load. Please note the red toolbox on top of the cabinets IS NOT included.
Price: 3995 USD
Location: Easton, Pennsylvania
End Time: 2024-09-11T15:42:55.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
