DMXking eDMX2 MAX – Ethernet ArtNet/sACN to DMX Controller 2 Universes [5-Pin]

Description: DescriptionRugged 2 port DMX512 node. Fully protected and isolated DMX512 IN/OUT independently configurable ports with advanced stream merging and built in show recording for standalone operation. Built tough with plenty of mounting options the eDMX2 fits nicely in your lighting rig by simplifying cable runs and eliminating the need for DMX distribution amplifiers/splitters. Mount an eDMX2 closer to the rig and run Ethernet cable back to the controller and better still power the eDMX2 right back at the controller up to 70m / 210feet away using Power over Ethernet. Can also be powered via USB-C.Supporting both DMX512 output and DMX512 input individually configurable on each channel along with Art-Net and sACN protocols the eDMX4 is an ideal choice for universe hungry lighting rigs. The flexible configuration permits 2 input DMX merge functionality too. Designed and manufactured in New Zealand to the highest standards. New addition to the MAX model is the 10-pin IO port that allows external show triggering.Recording/playback requires approved/tested SD card models (see recording manual for details).FeaturesConfiguration:All configuration options are stored in non-volatile memory on the device, so even if you need Windows/MacOSX for the configuration utility, you can still use this with other computers/devices once it's configured.Supporting both Art-Net and sACN the eDMX4 is ideal for when you need the top-of-the-line DMX512 node with support for 2 universes.Main Features:Static IP or DHCP network addressing.Supported operating systems: Any with Ethernet networking support. Windows, MAC OS, Linux, iOS, Android.Tough metal enclosure with multiple mounting optionsAvailable with 3pin or 5pin Neutrik XLR socket optionseDMX4 MAX - 4x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM supportMerge 2 incoming Art-Net streams per output channel with both HTP and LTP optionsMerge Art-Net + DMX input -> DMX output(s)Merge 2x DMX input -> DMX output(s)sACN Priority takeover for multi-tier controller arrangementsMix and match ArtNet with sACN merge/priority sources1500V Isolation between every portE1.11 Higher Protection Level “DMX512-A Protected” device.Power over Ethernet 802.3af compliant and etherCON for network connection. Alternative power via USB-C.Fully compatible with *ALL* software and hardware that supports Art-Net I, II, 3 & 4 and sACN protocols.Works with your existing console if Art-Net or sACN external nodes are supported.Universe Sync Art-Net, sACN and Madrix Post Sync.Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.Standalone show playback without a computer or network connection.Configuration utility (Win/OSX) with basic Art-Net output/input test functionality (Win only).Firmware updates can be performed by the end user.

Price: 329 USD

Location: Van Nuys, California

End Time: 2024-02-04T15:30:00.000Z

Shipping Cost: 0 USD