Doepfer A-101-6 Opto FET Filter Phaser EURORACK - NEW

Description: Synths. Pedals. DJ. Pro Audio. *FREE U.S. SHIPPING RISK-FREE RETURNS EXTENDED WARRANTY LOW PRICE GUARANTEE Zoom Doepfer A-101-6 Opto FET Filter Phaser EURORACK - NEW - PERFECT CIRCUIT $129.99 Contact Us 100% Satisfaction Guarantee Description A-101-6 is a new filter module that uses so-called opto FETs to control the filter frequency. Opto FETs are very similar to Vactrols but use light depending field effect transistors (FETs) instead of light depending resistors (LDRs). A opto FET is a combination of a light depending FET and a LED (light emitting diode) both put into a small light-proof case. The advantage compared to vactrols is the much faster response of opto FETs compared to LDRs. This allows much faster attack/decay times and even FM effects. The disadvantage compared to vactrols is that the FET behaves as a normal Ohm resistor only for small levels. With higher levels the FET begins to distort. Apart from this the notes mentioned on the Vactrol Basics page are valid. Module A-101-6 is made of six serial 6dB filter stages. Each stage can work as lowpass, highpass or one of two allpass types. The brightness of the Opto FET LEDs and consequently the filter frequency can be adjusted manually (Frequ. control) and controlled by means of an external control voltage (CV) with attenuator. The LED at the front panel reflects the LED brightness inside the opto FETs. The resonance is controlled by the Feedback control up to self oscillation. By means of a trimming potentiometer the maximal feedback can be adjusted. High feedback values can be used mainly in the allpass mode to obtain very extreme self oscillation sounds. Even an external feedback signal can be used instead of the internal feedback connection (FB In socket). Whenever the filter type is changed by means of the jumpers the trimming potentiometer for the maximal feedback has to be re-adjusted. The Mix control is used to pan between the original signal (CCW position) and the effect signal (CW position). In filter mode (LP/HP) this control is usually set fully CW. In the allpass modes one obtains phasing sounds at center position or "pure" allpass sound in fully CW position. Features Optical Voltage Controlled Filter using opto FET's Low-Pass, Band-Pass, High-Pass, and All-Pass filter slopes available Circuit board jumpers for altering configuration and filter slope Faster response than vatrols which allows for quick vc response and FM capabilities Feedback chain can be variable and repatched for strange resonance effects Shipping Warranty Low Price Guarantee Returns Restocking Fees Shipping In most cases, orders are processed and shipped within one business day. Orders placed before 1pm US Pacific time during the week are generally shipped the same day. Contact us with any questions or special requests and we will do our best to accommodate you. We offer free shipping on most items over $99 to destinations within the continental US. Hawaii, Alaska, Puerto Rico, and international destinations will require shipping and handling charges. We ship to most countries in the world via FedEx or USPS; most international orders are delivered within 5 business days of shipment, barring unforeseen delays caused by customs or weather conditions. We insure each package for its full value and require signature for most orders. International customers, take note that you are responsible for all duties and taxes imposed by your local government or customs officials. These fees are not included in our shipping/handling charges.

Price: 129.99 USD

Location: Burbank, California

End Time: 2024-11-12T20:52:04.000Z

Shipping Cost: 0 USD