E.F. Johnson P25/Conventional Repeater 700 MHz, 25 to 175 Watt.

Description: 2600 Series EF Johnson 700 MHz repeater. Programmable from 25 to 175 watts. See photos in operation. Repeaters programmed for Any NAC 3034 (xBDA) and 659 (x293). NAC 3034 programmed for local repeat only. NAC 659 programmed for local repeat plus multicast VoIP. As you can see NAC 659 (x293) repeats locally as shown and simultaneously brings up a remote remote unit through a simple hub or wide area network for multi-casting. Multi-casting works bidirectionally with desired operation simply programmed with supplied software via Ethernet. The 700 MHz version requires an external 10 MHz frequency standard (BNC connector input on rear panel). The repeater is designed to run at 100% duty cycle. There is a provision to connect an external analog controller such as a Zetron Model 38, not included but available if desired. The Model 38 if equipped will not provide cross mode operation. Example: A received P25 call cannot be rebroadcasted as an analog call with a linked ctcss/dcs or vice versa. Only the current mode received will be re-transmitted. I will ensure that repeater is aligned and programmed for your needs. All repeaters are fully reworked, inspected and heat run to ensure reliability. This listing is only for one repeater. Two repeaters are shown only to demonstrate multicast capability. Hub/Switch not included. 19" rack mounting. Requires slightly less than 5.5 rack units of vertical space (approximately 9.25 inches). Safe shipping requires two boxes. One for the chassis/power supply and one for the r.f. deck. Total shipping weight near 75 pounds. 24 VDC Battery Backup module (built in charger) available. Must purchase separately.

Price: 1495 USD

Location: Waseca, Minnesota

End Time: 2024-03-05T17:02:41.000Z

Shipping Cost: N/A USD