Description: Here is a new revision of my ESP32 development board. Now with 17uA Sleep current and LiPo Battery Charger. All boards ship with ESP32 Rev 1 modules installed. Made in and ships from the USA. Other than the ESP32 Revision1 module it has an Si Labs CP2104 USB to Serial converter, A 500mA 3.3V LDO, Reset and Flash Switches and a multi color LED. Added to this design is a LiPo battery charger, JST2R Battery Connector and 32.768kHz crystal. Every board offered in this listing ships with a matching battery cable. There are two tri-color LEDs on the board. One has the red and green LEDs hooked up to the CP214 to signal transmit and receive activity and the other is connected to three IO pins on the ESP32S module. The board supports auto-download from the Arduino environment and will automatically be set in download mode by the downloader. Once the download is complete the board will be reset, just like a normal Arduino board. All the required capacitors and pull-up resistors are fitted on the board. The board can be powered from an external power supply of up to 6V or the USB connector or both. Unlike most other boards this one fits on a breadboard and has one row of pins accessible on each side of the board. Most of the pins of the ESP32 module are available on the external pins. The board ships with header pins but they are not soldered to the board. The module can be programmed directly from the Arduino environment without pushing any buttons. The upload speed is 921600 bps. 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP Integrated dual mode Bluetooth (classic and BLE) 4 MByte flash 3 x UARTs, including hardware flow control 3 x SPI2 x I2S12 x ADC input channels2 x DAC2 x I2CPWM/timer input/output available on every GPIO pinSDIO master/slave 50 MHzSD-card interface support17uA Sleep current400mA 4.2V Shutoff LiPo Charger Schematic and example code can be found on forum dot ezsbc dot com
Price: 11.95 USD
Location: Prescott Valley, Arizona
End Time: 2024-01-11T00:08:02.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Features: Cloud Capability, I/O Header, LED, Reset Button, USB, WiFi Connectivity
MPN: ESP32-Bat
RAM Size: 512 KB
Platform: Arduino
Country/Region of Manufacture: United States
Program Memory Type: Flash
Model: ESP32-BAT
Brand: EzSBC
Core: Arduino
Type: General Embedded Development Board
