Firearms Accurizing Torque Wrench, Inch/Pounds Measurement,Bits and Storage Case

Description: Firearms Accurizing Torque Wrench, Inch/Pounds Measurement,Bits and Storage Case About this itemACCURACY: +/- 2 inch/pounds up to 40 inch/pounds; 40 – 65 is +/- 5%. The FAT wrench measures 2 L x 2 W x 6.25 H inches and the storage case measures 7.5 L x 5.5 W x 1.75 H inchesEASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the fieldRELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/poundsDURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼” socket and a convenient plastic storage caseLONGTERM USE: Always return to the lowest inch/pound setting after useFeaturesAlign the marker with the center of the desired torque valueDesigned for +/- 2 in-lbs accuracy up to 40 in-lbs, +/- 5% over 40 in-lbsCan be used to apply torque to any fastener, it is not limited to firearms and firearm accessoriesIncludes 9 bits and a square drive adapterCompatible with bits 72-Piece and 89-Piece Screwdriver SetsAlways protect the area surrounding the screw with masking tape to prevent marring of metal and wood finishes, just in case a bit slips out while tighteningFunctions like a screwdriver, it is not a ratcheting deviceIncludes:Storage caseLeupold/Buehler windage bit#10, #11, and #32 flat blade bits3/32", 7/64", 5/32" Allen bitsT15, T20 Torx bitsSquare drive adapter bit

Price: 62.99 USD

Location: Ha Noi

End Time: 2024-03-01T22:07:34.000Z

Shipping Cost: 0 USD