Description: This is our Jeep TJ/LJ front frame double shear track bar bracket. The factory track bar bracket on a TJ is a single shear design and puts a massive amount of stress on the frame, they have been know to tear loose from the frame under certain conditions. This bracket is designed to distribute the load over a larger area of the frame, it changes the track bar mounting to a double shear design instead of single shear making the mounting location much stronger. The tabs are designed to be welded to the bracket at an angle, this will keep your track bar joint in a neutral position at ride height. All components of this bracket are fabricated from 1/4 inch steel for ultimate strength. This bracket will position the center of the track bar joint 3-1/2 inches below the bottom of the frame. The mounting hole in the bracket is 9/16 inch and the mounting width of the bracket is adjustable from 1 inch to 2-5/8 inch. This bracket will not work with a factory track bar, an adjustable aftermarket track bar with a joint that is capable of being mounted in a double shear configuration is required.
Price: 25.55 USD
Location: Etowah, North Carolina
End Time: 2024-11-30T15:37:12.000Z
Shipping Cost: 11.95 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Included Hardware: Bracket
Placement on Vehicle: Front
Manufacturer Part Number: B4WK1149
Brand: Barnes 4WD
Part Type: Suspension Lift Kit Bracket Kit
