GGKit – Power Up your Logitech Pedals [Logitech & THR & Fanatec CABLE and USB]

Description: OVERVIEWGGKit is the latest update to the kit made by 3DRap to convert the factory pedals into a peripheral featured with the feeling of the more expensive which can be found on the market. 3DRap has condensed in the GGKit all the know-how in terms of hardware and software acquired starting from the creation of the MODs up to the more elaborate peripherals such as the nGASa pedal board. The KIT has been improved in its plastic parts, while the metal parts have been painted with a black industrial paint, for a renewed aesthetic finish. The fundamental keys with which GGKit was conceived have always marked the philosophy of 3DRap: FeelingRealismCustomization Thanks to the features of the hardware, software and electronics, LogiKit allows to reach the perfection of the feelings due to the customization of signals and mechanics. Pedals customization is essential to get the best lap time. LOAD CELL 3DRap allows you to have a working brake with a load cell but also to be able to manage it thanks to the use of hardware and software developed ad hoc for the correct management of the signal. The signal is high-resolution with 16-bit sampling, to increase the feeling and the management of trail bracking (a technique used by pilots to dose the last phases of the braking manoeuvre). The maximum force of the brake pedal is approximately 30 [kgf], and it is possible to modulate it to your liking thanks to the use of a pair of interchangeable elastomers supplied, designed and engineered ad hoc: Hard elastomer: allows for a stiffer brake pedal, with less travel; it is suitable for formula cars equipped with a mechanical drive pump; Soft elastomer: allows the brake travel to be slightly increased, improving modulation on rally or GT category cars, usually equipped with power brakes. Additionally, GUI adjustments allow you to further fine-tune the feel of the load cell. HALL SENSOR With GGKit, the native potentiometers are replaced by hall effect sensors on the throttle and clutch pedals thanks to a harness created ad hoc by 3DRap; unlike the common potentiometer, the hall effect sensor does not undergo any wear mechanism thanks to the absence of physical contact between the moving parts, which is why it is much more reliable over time. The GGKit electronic board guarantee a high resolution of the signal from the hall effect sensors which use 12-bit sampling to improve the modulation during throttle and clutch operation. The activation precision is guaranteed by the design of the components of the kit involved in the operation of the hall effect sensor and by the autotune managed by the firmware developed by 3DRap. TECHNICAL INFOPlates for adjusting the inclination of the pedals and sliding in depth;Extension for the pads to lengthen the lever reaching the ergonomic set-up of the PRO pedal sets;Pair of interchangeable elastomers for brake pedal, to modify hardness and stroke (Medium and Hard Elastomer);Pair of interchangeable elastomers for the clutch pedal (they are the same shared with the brake but interchangeable with the clutch), to modify hardness and stroke (Medium and Hard Elastomer) plus spacers to preload the spring and enhance the effect;Elastomer and end-of-stroke pads to modify the hardness and physical travel of the accelerator pedal;Kinematics on bearings to create the double detachment effect on the clutch pedal (it is a skill of the PRO pedal sets);12-bit hall-effect sensors in place of native throttle and clutch potentiometers;16-bit load cell instead of native potentiometer;Proprietary Software GUI for managing signals on single axes;Proprietary electronic board and firmware. Compatibility PC (Windows);Logitech wheelbase (via connector DB9);Thrustmaster wheelbase (T500 exluded) (via connector RJ);Fanatec wheelbase (via connector RJ). The console version of GGKIT is compatible with Playstation 4, Playstation 5 and XBox, through Logitech, Thrustmaster or Fanatec wheelbases in place of DB9, or RJ pedals connector. Also on G Pro Logitech base through Logitech Racing Adapter. The GGKIT pedal set represents the best on the market for your base in console driving simulations. This way you can maximize your performance on the track with the Logitech, Thrustmaster or Fanatec wheelbase. Note for G25 / G27 bases: external hub can be necessary for these bases to ensure the proper functions. ELETRONICS AND SOFTWARE The GGKit electronic board automatically calibrate the pedal signals when switched on; in addition, through the dedicated software is possible to completely customize the character of each pedal by acting on the parameters made available by the GUI. This will allow you to get the perfect response depending on the car you choose to drive. In addition to the mechanical customizations and regulations, thanks to the interface you have the possibility to shape your own experience with GGkit to face any challenge.

Price: 152.5 USD

Location: Mercogliano

End Time: 2024-10-30T17:02:54.000Z

Shipping Cost: 11.9 USD