HELIX M SIX DSP 6x130w 10-Ch 64 Bit DSP + CONDUCTOR Programable Remote NEW

Description: HELIX COMBO HELIX M SIX DSP 6x100w RMS + 10-Channel DSPHELIX CONDUCTOR Programable DSP Remote ControlHELIX M SIX DSP Features Up to 130 Watts RMS max. output power per channel into 4 & 2 ΩExtremely powerful 64 Bit “fixed point” Audio DSP and state-of-the-art AD and DA signal convertersACO – Advanced 32 Bit CoProcessor platform for enhanced system and DSP features like:ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signalsSFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.Smart 6-channel highlevel input with ADEP.3 circuitFour RCA / Cinch line outputs with max. 6 Volts output voltageVirtual Channel Processing (VCP) allows even more flexible configuration for highly complex sound systemsBridgeable amplifier channels for driving powerful woofer or subwooferDSP-board manufactured in GermanyTechnical data Power RMS ≤ 1% THD+N - @ 4 Ohms6 x 100 Watts - @ 2 Ohms6 x 100 Watts- @ 1 Ohm- - bridged @ 4 Ohms3 x 200 Watts- bridged @ 2 Ohms- Max. output power per channel*Up to 130 Watts RMS @ 4 / 2 OhmsAmplifier technologyClass DInputs6 x RCA / Cinch6 x Highlevel speaker input1 x Optical SPDIF (12 - 96 kHz)1 x Remote InInput sensitivityRCA / Cinch 1 - 4 VoltsHighlevel 5 - 20 VoltsInput impedance RCA / Cinch22 kOhmsInput impedance highlevel9 - 33 Ohms or 20 kOhmsOutputs6 x Speaker output4 x RCA / Cinch2 x Remote OutOutput voltage RCA / Cinch6 VoltsFrequency response20 Hz - 22,000 HzDSP resolution64 BitDSP power295 MHz (1.2 billion MAC operations/second)Sampling rate48 kHzDSP typeAudio signal processorSignal-to-noise ratio digital input105 / 108 dB Speaker / Line Output (A-weighted)Signal-to-noise ration analog input102 / 105 dB Speaker / Line Output (A-weighted)Distortion (THD)< 0.03 / 0.005 % Speaker / Line OutputDamping factor100Operating voltage10.5 - 16 Volts (max. 5 sec.down to 6 Volts)Idle current1950 mAMax. remote output current500 mAOperating temperature range-40° C to +70° CFuse2 x 35 A Maxi-fuse (APX)Power ratingDC 12 V ⎓ 80 A max.Additional featuresADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control InputDimensions (H x W x D)50 x 320 x 154 mm /2.00 x 12.60 x 6.06”* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)CONDUCTOR Features § Up to 4 individual volume menus configurable (Master, Digital, HEC/AUX, Subwoofer, Rear Attenuation) § Volume range selectable (60 dB, 24 dB, 12 dB) § Volume steps selectable (1 dB steps, 0.5 dB steps) § Individual color for each volume menu configurable § Sound Setup selection between all 10 memory slots § Intuitive Bluetooth playback control and pairing activation (only in combination with an optional Bluetooth Extension Card) § 12 x RGB-LEDs for visual feedback § Wide color space with over 16 million colors § Brightness and automatic dimming function configurable § Easy installation § Flush mount installation with Ø 40 mm hole cut-out § 5 m cable harness with split connector and single connector supply § Optional housing for on-dash installation available soon § Full configuration and updatability through the DSP PC-Tool software Technical data CONDUCTOR for Control Input Housing ABS housing with machined aluminum knob Hardware Rotary encoder, 12 x RGB-LEDs & 48 MHz ARM processorr Connection Single connector supply through NanoFit Cable length 5 m total length – split into 4.8 m connection cable + 0.2 m CONDUCTOR cable Dimensions (Ø x H) Ø 46 x 28.7 mm / Ø 1.81 x 1.13” Installation depth 17 mm / 0.67"

Price: 949 USD

Location: Yakima, Washington

End Time: 2024-12-20T16:00:30.000Z

Shipping Cost: 0 USD