Description: High Teck HFP250 EBONY BLACK Urethane Base Coat Quart COMPARE TO: GM WA8555 National rule product This product CAN NOT be USED in California due to VOC Regulations. It is your responsibility to comply with VOC regulations A quick dry, good hiding, factory pack basecoatIdeal for overalls and large blend area repairsA great ground coat for use under other basecoat colorsThere are to many color variances for this color to be able guarantee a factory color match APPLICATION Surface PrepFor Dry Sanding Final sand with 500-600 GritFor Wet Sanding Final sand with 800-1000 GritClean area with Wax and Grease Remover and wipe dry with a clean cloth Tack Cloth any dust or dirt particles MixingNormal 1 Part Color, 1 Part Urethane ReducerBetter Hide 2 Parts Color, 1 Part Urethane Reducer<10% Hardener(optional) Spray Gun Set-UpGravity Feed 1.3-1.5mm 30 PSI at the gun inletGravity Feed HVLP 1.3-1.5mm 10 PSI max at air cap CoatsApply 2-4 coats or until full coverage is achieved Allow each coat to flash off 5 to 10 minutes between coatsAllow 20 minutes flash time after last color coat to apply clearcoat.
Price: 42.98 USD
Location: Clearwater, Florida
End Time: 2024-07-22T13:22:17.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: High Teck
Type: Automotive Basecoat
Color: Ebony Black
Manufacturer Part Number: HFP250
Factory Color Code: GM WA8555
Paint Type: Urethane Base Coat
Country/Region of Manufacture: United States
Paint Volume: Quart
California Prop 65 Warning: This product contains a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.
