Honda S2000 Trunk Boot Luggage Rack ; No Clamps = No Damage

Description: Revo-Rack is a completely different, completely new type of Luggage Rack, only manufactured by us.It eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge/surface. Revo-Rack can be fitted in under a minute without any tools. Please watch the video's below.Revo-Rack has been extensively tested by TUV Italy to ensure its safe. It underwent force tests, speed tests and braking tests - It passed all of the these. The only convertible luggage rack globally that has been tested in this way. Tested to ISO/PAS 11154:2006 Road vehicles - Roof load carriers & European Directive for the General Safety 2002/95/CEWith the Revo-Rack luggage rack no metal touches your Honda only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your S2000's boot/trunk lid. This model is hand polished then anodised for a deep luster. We also make the rack in a black finish. Why a Revo-Rack Luggage Rack ?Fits in 90 seconds no tools required, no fiddly brackets or bolts.Often fitting a conventional rack without damaging the fragile boot edge or surface is almost impossible, there is literally no space for a clamp or strap.Lightweight aluminium & magnesium frame weighs 1.7kg will never rustNo straps or clamps on the boot surface/edge to mark and damage paintRevo-Racks load carrying capacity has been rated at 20kg Supplied with two luggage straps and storage bagMade by the boot-bag groupSigned for delivery by DHL with a 1 hour delivery slotDespatched next working day on a next day service if ordered before 3pm i.e. order Monday at 3 receive Wednesday. The Rack Frame :This luggage rack is manufactured from 25mm/ 1" T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency. The rack measures 900x420mm / 36"x17" The Vacuum Cup Supports :The rack is secured to your boot/trunk lid using three 115mm vacuum cups, rated as capable of holding an 18kg/40lb load each, technically the rack can hold 54kg.The vacuum cup technology that Revo-Rack uses has existed for over 40 years it was developed in the film industry in the late 1960's to hold film camera's to cars, and is still in use today. Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. These are not suction cups that produce a vacuum as they pull away from the surface. Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot lid, distortion is reduced, allowing the cup to be used with very little risk of damage.The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still recognised as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.Lifting on the release tabs near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lidFor more detailed information please see www.revo-rack.comRevo-racks design is protected by UK, EU and North American Patents. Revo-Rack PA Convertible Luggage Rack - YouTube Video will open in a new windowUsing the eBay App? Paste link into a browser window: [isdntekvideo] Please note : All EU orders are shipped from our Dutch based warehouse with no import VAT or duty to pay.-->Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. These are not suction cups that produce a vacuum as they pull away from the surface. Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot lid, distortion is reduced, allowing the cup to be used with very little risk of damage. The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still recognised as one of the

Price: 669.1 USD

Location: Buckingham

End Time: 2024-12-29T23:18:31.000Z

Shipping Cost: 0 USD