Di-Acro

Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional...

Description: Migiwata 6Pcs Imperial Drill Taps These drill taps are a great time saving accessory. Each one is a combination of a twist drill bit and a tap. The point is the same as a twist drill bit, which is self-centering. So you don’t have to buy a centering drill bit or a center punch. Now you can drill and tap at the same time in one operation. Just drill until the drill section fully enters the material, then the tapping will start to occur. When it reach the right depth, reverse the drill to deburr and remove any swarf to complete the job. No tool changes, good alignment and fast cycle times make this a very productive tool. The Migiwata tap drill set also features wide spiral flute, which allow the chips to easily get out of the hole, preventing chip crowding and breakage of tap drill bits. NOTICE: It’s highly recommended that the combination drill and tap bits are used on a tapping machine. If you apply an electric hand drilling machine to do the tapping job, please pay attention to your operating, because excessive shaking and tilting may affect the result and even break the bit. Specification: Material: HSS 4341 Shank: 1/4” (6.35mm) hex shank Color: silver metal color What you’ll get: BSW 1/8” – 40 Tap Drill Bit x 1pc BSW 5/32" - 32 Tap Drill Bit x 1pc BSW 3/16” - 24 Tap Drill Bit x 1pc BSW 1/4” - 20 Tap Drill Bit x 1pc BSW 5/16” - 18 Tap Drill Bit x 1pc BSW 3/8” -16 Tap Drill Bit x 1pc Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc. Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials 6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.

Price: 18.51 USD

Location: Lathrop, California

End Time: 2024-11-24T10:25:12.000Z

Shipping Cost: 0 USD

Product Images

Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional...Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional...Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional...Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional...Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional...Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional...Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional...

Item Specifics

All returns accepted: ReturnsNotAccepted

Return policy details:

Color: Sliver Imperial

Size: small

EAN: 0610521863079

ISBN: 0610521863079

Package Dimensions LxWxH: 2.91x2.72x0.55 Inches

Weight: 0.24 Pounds

Type: Does not apply

Brand: HYMNORQ

Recommended

5/16 Inch Masonry Drill Bits 10pc Pack 4 Edges Yg6x Carbide Tipped Cross Spear H
5/16 Inch Masonry Drill Bits 10pc Pack 4 Edges Yg6x Carbide Tipped Cross Spear H

$25.04

View Details
Metric 9mm M35 Cobalt Steel Drill Bit Set of 5pcs with Straight Shank to Cut ...
Metric 9mm M35 Cobalt Steel Drill Bit Set of 5pcs with Straight Shank to Cut ...

$23.64

View Details
Hymnorq 3/16 Inch Glass and Tile Drill Bit 10pc Set, YG6X Tungsten Carbide Ti...
Hymnorq 3/16 Inch Glass and Tile Drill Bit 10pc Set, YG6X Tungsten Carbide Ti...

$21.49

View Details
Hymnorq Cobalt Steel Twist Drill Brill Bits 74pc Set, M35 Grade HSS Co, Metric S
Hymnorq Cobalt Steel Twist Drill Brill Bits 74pc Set, M35 Grade HSS Co, Metric S

$32.66

View Details
Metric 1.010 Mm Straight Shank M35 Grade Cobalt Steel Jobber Length Twist Drill
Metric 1.010 Mm Straight Shank M35 Grade Cobalt Steel Jobber Length Twist Drill

$40.92

View Details
Hymnorq 15 Piece Metric M35 Cobalt HSS Drill Bit Kit with Straight Shank for ...
Hymnorq 15 Piece Metric M35 Cobalt HSS Drill Bit Kit with Straight Shank for ...

$35.02

View Details
M35 Cobalt Jobber Twist Drill Bits Set of 13pcs in Indexed Case, 2 to 8mm Met...
M35 Cobalt Jobber Twist Drill Bits Set of 13pcs in Indexed Case, 2 to 8mm Met...

$26.44

View Details
Hymnorq Brad Point Wood Drill Bits 8PC Set, Metric Size 3mm-10mm by 1mm in...
Hymnorq Brad Point Wood Drill Bits 8PC Set, Metric Size 3mm-10mm by 1mm in...

$17.99

View Details
31/64 Inch Dia. X 5.87 Inch Long M35 Cobalt Steel Twist Jobber Length Drill Bits
31/64 Inch Dia. X 5.87 Inch Long M35 Cobalt Steel Twist Jobber Length Drill Bits

$23.72

View Details
Hymnorq 3PC Wobble Socket Adapters, 360 Degree One Size, 3pcs 360 Black
Hymnorq 3PC Wobble Socket Adapters, 360 Degree One Size, 3pcs 360 Black

$13.35

View Details