Icon Multi-Rate 1-3" Lift Leaf Spring w/ Add-A-Leaf Fits 2017-2020 Ford Raptor

Description: Icon Multi-Rate 1-3" Lift Leaf Spring w/ Add-A-Leaf Fits 2017-2020 Ford Raptor The Ford Raptor is an extremely capable truck that has captured the attention of the off-road community over the past few years. Since the Raptor’s release ICON Vehicle Dynamics’ engineers have pushed this vehicle to extremes to develop the most sophisticated suspension components on the market. From the brutal deserts of the Southwest, to the deep snow of Michigan’s U.P., to the wooded trails of the East coast ICON suspension systems have been put to the test and performed flawlessly. Unable to leave “well-enough” alone, ICON is aiming to once again raise the bar in Raptor performance with the release of a multi-rate leaf spring that represents the latest component in the ICON complete suspension system for the Gen 2 Raptor. To fully take advantage of ICON’s current 2017-UP F150 Raptor offerings, ICON engineers decided to scrap the OE leaf springs and develop a replacement that addressed a couple issues found in the R&D process. The result is a user-adjustable multi-rate leaf pack that offers a major performance gain for almost every Raptor setup imaginable. To increase the ride quality of the truck and gain additional droop travel, the spring rate was designed to be slightly lighter than factory, which was found to be on the stiff side for smaller, choppier terrain. While most Raptor owners will embrace the improved ride quality this provides, there are those who have outfitted their trucks with a significant amount of weight and require more load carrying capability. Understanding this, ICON engineers designed the leaf pack with an additional leaf (included with kit) that can be exchanged or added to the pack, yielding an additional 20% or 40% spring rate that will work well for heavier vehicles. Features like tip inserts and leaf separators add to ride comfort, while a triple military wrapped front and rear half wrapped eyelet increases durability and strength of the leaf spring. A rebound leaf was added to reduce the axle wrap of the Raptor, which was another issue that has been found through ICON’s extensive testing. These features all combine for a ride that is night and day smoother on choppy trails, dirt roads, and even in the parking lot. No matter if its a spare tire, chase rack, a roof top tent, or more this ICON leaf spring is the perfect option for 2017-UP Ford F150 Raptors looking to improve the ride quality and performance with a reliable and proven bolt-on solution. Features:3 user-adjustable spring rates for unique vehicle setupsTriple military wrap front eyelet and rear half wrap for increased durabilityRebound leaf reduces severe axle wrapLeaf separators and tip inserts reduce noise and friction while increasing ride comfortDirect bolt-in to OEM spring location makes for an easy install“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durabilityCompatible with factory shocksDoes not require modification of factory exhaust systemRemoval of the bed is not required for installationICON multi-rate leaf springs require bump stop spacer kit (PN: 95226) if ICON's hydraulic bump stop kit (PN: 95121) is not usédThese leaf springs are sold indivually. A quantity of 2 are required per vehicle.Hardware kit part # 95225H required for installation (sold separately)Icon Multi-Rate 1-3" Lift Leaf Spring w/ Add-A-Leaf Fits 17-19 Ford F150 Raptor The Ford Raptor is an extremely capable truck that has captured the attention of the off-road community over the past few years. Since the Raptor’s release ICON Vehicle Dynamics’ engineers have pushed this vehicle to extremes to develop the most sophisticated suspension components on the market. From the brutal deserts of the Southwest, to the deep snow of Michigan’s U.P., to the wooded trails of the East coast ICON suspension systems have been put to the test and performed flawlessly. Unable to leave “well-enough” alone, ICON is aiming to once again raise the bar in Raptor performance with the release of a multi-rate leaf spring that represents the latest component in the ICON complete suspension system for the Gen 2 Raptor. To fully take advantage of ICON’s current 2017-UP F150 Raptor offerings, ICON engineers decided to scrap the OE leaf springs and develop a replacement that addressed a couple issues found in the R&D process. The result is a user-adjustable multi-rate leaf pack that offers a major performance gain for almost every Raptor setup imaginable. To increase the ride quality of the truck and gain additional droop travel, the spring rate was designed to be slightly lighter than factory, which was found to be on the stiff side for smaller, choppier terrain. While most Raptor owners will embrace the improved ride quality this provides, there are those who have outfitted their trucks with a significant amount of weight and require more load carrying capability. Understanding this, ICON engineers designed the leaf pack with an additional leaf (included with kit) that can be exchanged or added to the pack, yielding an additional 20% or 40% spring rate that will work well for heavier vehicles. Features like tip inserts and leaf separators add to ride comfort, while a triple military wrapped front and rear half wrapped eyelet increases durability and strength of the leaf spring. A rebound leaf was added to reduce the axle wrap of the Raptor, which was another issue that has been found through ICON’s extensive testing. These features all combine for a ride that is night and day smoother on choppy trails, dirt roads, and even in the parking lot. No matter if its a spare tire, chase rack, a roof top tent, or more this ICON leaf spring is the perfect option for 2017-UP Ford F150 Raptors looking to improve the ride quality and performance with a reliable and proven bolt-on solution. Features:3 user-adjustable spring rates for unique vehicle setupsTriple military wrap front eyelet and rear half wrap for increased durabilityRebound leaf reduces severe axle wrapLeaf separators and tip inserts reduce noise and friction while increasing ride comfortDirect bolt-in to OEM spring location makes for an easy install“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durabilityCompatible with factory shocksDoes not require modification of factory exhaust systemRemoval of the bed is not required for installationICON multi-rate leaf springs require bump stop spacer kit (PN: 95226) if ICON's hydraulic bump stop kit (PN: 95121) is not usédThese leaf springs are sold indivually. A quantity of 2 are required per vehicle.Hardware kit part # 95225H required for installation (sold separately)PaymentShippingReturnsPayment PaymentShippingReturnsPayment We except all major credit cards and paypal.PaymentShippingReturns Shipping PaymentShippingReturns Shipping We offer FREE ground shipping on all orders within the 48 states with no hidden fees. Most items will ship to Alaska, Hawaii, U.S. territories, and internationally for an additional fee, but please contact us for a quote. With over 20 fulfillment centers nationwide, most items are delivered in 1-2 business days and when you place your order before 3 p.m. CST, it will ship that same day. For freight shipments, please allow additional prep time and note that we require a phone number for delivery. FREE curbside delivery for all freight shipments. We ask that you please provide a physical address for your order so it arrives on your doorstep safely and soundly as we cannot ship to APO/FPO/PO box addresses. Our team will ship your order to the PayPal verified address provided, so any address change request made outside of PayPal is not guaranteed. We ship with Fedex, USPS, Ontrac, Lasership, DHL, Speedee and UPS.PaymentShippingReturns ReturnsPaymentShippingReturns Returns Returning Your Order: If you need to return something, we will happily accept your return for a refund within 60 days from the day it was delivered to your door. If you miss the 60-day window, still reach out to us and we can do what we can to help you out. Return Process: 1. Submit return request via the eBay Returns Portal. 1. Find the item in My eBay under Purchase History and select Return this item from the More actions drop-down menu. 2. Select the reason for the return. 3. Please ship the product back to us with all original parts. 4. Our returns team will quickly ship your replacement or refund your payment. Have a warranty issue? Please reach out to us and we can help you handle any warranty problems. eBay integration by

Price: 583.76 USD

Location: Kokomo, Indiana

End Time: 2024-08-17T21:27:12.000Z

Shipping Cost: 0 USD