iCrimp Open Barrel Terminal Crimping Tool for Molex Style DELPHI AMP Orange

Description: Open Barrel Terminal Crimper: IWS-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal.Deutsch Stamped Contact Size 16 Crimp Tool: Designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice.Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination.B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG.IWS-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability. Replacement/equivalent to Delphi/Packard 12085271 and/or SPX Kent Moore J-38125-7 crimping tools. This is a Molex style crimping tool that works with the 14-24 AWG terminals. You simply have to strip off about 3/16" of insulation from the end of the wire then use this tool to crimp the terminal to the insulation and wire for a tight and secure connection. This particular tool works well because it is double hinged, meaning the crimping jaws stay parallel and clamp straight together. Also, the crimping jaws are only 4mm thick allowing you to separately/individually crimp the insulated and non-insulated part of the wire to the terminal. Additionally, it offers 5 different sized crimps in a single tool. Other crimping tools try to crimp both parts of the terminal to the wire and caused the terminal to get stuck in the tool, messing up the crimp. This tool also features comfortable rubber handle grips, that are removeable for cleaning if they get greasy/dirty. This is a comparable tool to the Delphi/Packard 12085271 and SPX Kent Moore J-38125-7, but is actually an improvement because of the double-hinge mechanism that keeps the jaws parallel for a straight crimping engagement. Insulation Crimp AWG 14-18 Ga. Use Crimp Slot A AWG 20-24 Ga. Use Crimp Slot B Stripped Wire Crimp AWG 14-16 Ga. Use Crimp Slot C AWG 18-20 Ga. Use Crimp Slot D AWG 22-24 Ga. Use Crimp Slot D/E Maximum range (conductor crimps) 22-12 AWG Maximum range (insulation crimps) 24-14 AWG Any problem, pls feel free to contact the seller, we promise we will reply within 24 hours ASAP.

Price: 26.99 USD

Location: Brookline, Massachusetts

End Time: 2025-01-04T11:58:06.000Z

Shipping Cost: 0 USD