Intelligent Pipeline Detector Underground Utility Cable Locator Path Instrument

Description: Product parameters Receiver specifications Function Pipeline detection (cable position tracking, direction display, depth measurement, current measurement), cable identification, A word frame fault search (optional function) Power 8.4V large capacity rechargeable lithium battery Input mode Built-in receiver coil, flexible caliper, A-character frame (optional function) Receive frequency Active detection frequency:250Hz、577Hz、640Hz、1.28kHz、2.56kHz、3.20kHz、4.09kHz、8.19kHz、10.2kHz、33kHz、66kHz、82kHz、197kHz Power frequency passive detection frequency:50Hz、60Hz RF passive detection frequency band: the central frequency is divided into33kHz、66kHz、82kHz、197kHz Pipeline detection mode Wide peak method, narrow peak method, sound valley method Pipeline detection display Classic positioning mode, wire cruise mode, peak and trough mode Pipeline detection Range of detection Direct connection method: generally can reach the cable length of 0~20 kilometers, mainly determined by the grounding resistance, cable resistance and cable buried depth Coupling method: generally can reach the length of the cable 0~10 kilometers, mainly determined by the grounding resistance, cable resistance and cable buried depth Induction method: suitable for cables with buried depth less than 2m Depth and current Display the cable depth and current value in real time Pipeline measurement depth 0-20m Deep precision Plane position precision accuracy: the central axis position of the target cable or line： ±5%（Buried deep in0-3m）-10%（Buried deep in3m-20m） Positive and wrong prompt Excluding the interference of adjacent cables, in the measurement of adjacent cables, the measurement of the adjacent cables can be distinguished according to the different signal strength and the measured current phase of the adjacent cables. In the process of tracking the cables, the phase dial and pointer can be observed to distinguish the measured cables and the adjacent cables Sound instructions FM tone with signal intensity capacity of resisting disturbance Very narrow receiving frequency band and unique digital processing method can fully suppress the power frequency and harmonic interference of adjacent operating cables and pipelines interference distance When using the coupling method and the induction method, the transmitter will produce interference in close distance. The distance of interference is related to the transmission power and frequency. The greater the power, the higher the frequency, the stronger the interference. The minimum distance of the receiver without disturbed by the transmitter often needs to be determined by test: Pipeline detection: 5m away, 20m away as no interference Cable identification: the coupling method beyond 2~5m can be confirmed as no interference Cable identification Identification mode: flexible caliper intelligent identification; Number of calibrate cables: 1~20; Calibration value: the current percentage of the received signal and the transmitted signal between 75% and 135% of the calibration value is one of the conditions for successful identification; Directionality: the transmitter clamp, receiver clamp must be in the same direction as the loading signal, which is one of the conditions for successful identification Cable identification Range of detection Direct connection method: can identify the signal with a circuit resistance of 0 Ω ~ 8 kΩ (generally, the length of the cable can reach 0~20 km, mainly determined by the grounding resistance and cable resistance) Coupling method: can identify the signal with circuit resistance of 0 Ω ~ 1 kΩ; (generally the cable length is 0~6 km, mainly determined by the grounding resistance and cable resistance) Display 4.3 LCD color screen LCD (highlight screen), visible in the sun Touch screen Yes Size 350mm(length)×155mm(width)×700mm(high) Weight 2kg Connection interface Type-C USB interface, air socket Coil inner diameter φ200mm(A larger caliber can be customized as needed) Working temperature and humidity -10℃～40℃；Below 80%Rh Store temperature and humidity -10℃~50℃；≤95％RH, No condensation withstand voltage AC2000V/rms(Before the front and rear ends of the enclosure) Suitable for safety regulations IEC61010-1 CAT Ⅲ 600V，IEC61010-031，IEC61326，Pollution grade 2 Transmitter specifications Function Multiple frequency signal transmission modes Power 10.8VLarge-capacity rechargeable lithium battery Output method Direct connection method, caliper coupling method, induction method Output mode Automatic identification, according to different accessories output frequency 250Hz、577Hz，640Hz，1.28kHz，2.56kHz，3.20kHz，4.09kHz，8.19kHz，10.2kHz，33kHz，66kHz，82kHz，197kHz Output power 15 Wmax, 6-gear adjustable impedance Automatic real-time impedance matching and protection function Direct output voltage 150Vpp max Circuit protection With overload and short-circuit protection Display 5-inch LCD color screen Touch screen Yes Instrument size 320mm(Length)×275mm(Width)×145mm(High) Weight The transmitter is about 3.85kg; the transmitter clamp is about 1.18kg Transmitter clamp inner diameter φ125mm cable length of transmitter clamp 3m Test cable Red test cable 3m, black test cable 3m Connection interface USB interface, DC interface, aviation socket Resistance to pressure The transmitter adopts an integrated special tool box type design, and the box body can withstand the pressure of about 200kg Withstand voltage AC 3700V/rms(Before the top surface and bottom surface of the instrument box) Electromagnetic characteristics IEC61326(EMC) Suitable for safety regulations IEC61010-1(CAT Ⅲ 300V、CAT IV 150V、class of pollution 2) product description

Price: 2269.55 USD

Location: China

End Time: 2024-09-22T08:24:23.000Z

Shipping Cost: 0 USD