Ivoclar Tetric N-Bond Universal 8th Generation Bonding Agent Dental 6g/Bottle

Description: Product Specification: 6g/bottle Product Introduction: Universal resin adhesive is a single component light cured resin adhesive suitable for direct and indirect repair, suitable for all acid etching techniques: self etching, selective enamel etching, and total etching techniques Product Usage: 1. Direct bonding for photo cured or double cured composites and composite restorations 2. Indirect bonding for all ceramic and composite restorations (inlay, high inlay, ceramic veneer) Product Applicable: 1. Direct bonding of UV cured resins and composites 2. Self curing, UV curing, and dual curing resin cores 3. Adhesive pre-treatment for indirect restorations, suitable for light curing or dual curing adhesive systems 4. Directly repair broken resin or composite in the mouth 5. Desensitization of sensitive areas in the neck of teeth 6. Indirect restorations seal the surface of teeth before temporary/permanent bonding Product Usage: Direct repair body 1. For better access to the treatment area, an opener can be chosen, such as the 3D stereoscopic opener from Yihuo Jiawei Walden Company 2. It is best to use a rubber barrier (such as using an OptraD am @ Plus rubber barrier that conforms to the shape of human anatomy to ensure complete isolation) 3. Prepare cavities according to adhesive technology requirements 4. Air gun spraying water to clean cavities 5. Blow dry the nest hole 6. If it is necessary to apply a pulp protective layer (calcium hydroxide), only cover the area close to the pulp, and then apply a compressive adhesive (such as VivagalassLiner) 7. Place formed pieces and interdental wedges around the cavity 8. First, apply the phosphate etchant NEtch to the prepared enamel, and then apply it to the surface of the dentin. Let the etchant react on the enamel for 30 seconds and on the dentin for 10 to 15 seconds. Afterwards, rinse with water for at least 5 seconds to remove excess water and make the surface of the dentin slightly damp and shiny (wet bonding). Can use air guns and cotton rolls to absorb excess moisture Attention: Do not excessively dry the dentin; The reaction time on unprepared enamel (such as pit and fissure sealants) is 30 to 60 seconds 9. Apply the adhesive to the dentin for at least 10 seconds to avoid insufficient coverage of the cavity. Use an air gun to blow dry any excess adhesive 10. Use a light curing machine to illuminate the adhesive for 10-15 seconds. Before illumination, check that each surface of the cavity is a uniform and smooth surface 11. Apply a thin layer of fluid resin Tetrac Nflow evenly to the bottom of the cavity, light for 10 seconds, and fill with nano ceramic resin with a maximum thickness of 2mm (enamel color) or 1.5mm (dentin color). Use a resin molding tool to fill the resin layer by layer, and each layer of resin needs to be cured separately to ensure that the guide rod of the light fixation lamp is as close to the repair material as possible; Use appropriate car needles and polishing wheels to repair the restoration, then check the bite and polish with resin polishing wheels. Precautions : 1. Patients who are allergic to any component of dental adhesives or fail to meet the prescribed work techniques 2. Dental adhesives shall not be used in combination with fully self curing composite materials. Apply dental adhesive directly to the pulp 3. In rare cases, patients with high sensitivity to a certain component of dental adhesives can cause allergic reactions 4. To avoid potential irritation to the pulp, use suitable pulp/dentin protectants as much as possible in areas close to the pulp (use calcium hydroxide preparations in areas close to the pulp) 5. Dental adhesives are irritating and should be avoided from contact with the skin, mucous membranes, and eyes. If the product comes into contact with the skin, rinse with soapy water Adverse reactions: 1. Materials containing eugenol or clove oil may inhibit the bonding of dental adhesives 2. Cationic mouthwash, plaque display agents, and chlorhexidine may cause discoloration of adhesives FDA STATEMENT The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

Price: 55.8 USD

Location: ZhengZhou

End Time: 2024-10-29T03:52:31.000Z

Shipping Cost: 0 USD