JC Whitlam Flow-Aide System Descaler Kit

Description: Revitalize Your Appliances with JC Whitlam Flow-Aide Descaler Kit Flow-Aide System Descaler quickly dissolves water scale, lime, rust, and other water formed deposits, restoring efficiency to most all appliances. Flow Aide System Descaler is a non-toxic concentrate which is certified to NSF/ANSI 60 for use as a cleaner in potable water systems. Flow-Aide System Descaler is specifically designed to dissolve the toughest water scale, lime, and rust deposits from virtually any piece of water based equipment. This powerful, yet totally safe, liquid is non-toxic, non-flammable, non-hazardous, non-corrosive and biodegradable. Flow-Aide System Descaler will not harm your personnel, equipment or our environment! Brand: JC Whitlam MPN: FLOW-KIT Kit Includes: 3.5 Gallon Bucket, 725 GPH Pump, 2 Rubber Hoses, 1 Quart Flow-Aide (FLOW32) Bucket: 3.5 gallon capacity with tear tab lid 725 GPH Pump: Oil free with 15' Power Cord Hoses: 2 with Male/Female Connections to Extend Drain line 10 feet Flow-Aide Descaler Solution: 1 quart container Certifications: NSF/ANSI 60 for use in potable water systems, ensuring the safety of your drinking water Effective for Descaling: Boilers, Chillers, Evaporators, Tanks, Humidifiers, Condensers, Water Heaters, Heat Exchangers, Potable Water Lines, Ice Machines, This powerful liquid is non-toxic, non-flammable, non-hazardous, non-corrosive and biodegradable. Flow-Aide System Descaler will not harm your personnel, equipment or our environment! Flow-Aide Biodegradable Descaler is a non-toxic concentrate which is certified to NSF/ANSI 60 for use as a cleaner in portable water systems, such as beverage, pharmaceutical, bottling, poultry, and other food processing plants. Whitlam Flow Aide System Descaler Kit has been designed to work with Tankless Water Heaters that provide 3/4" hot and cold service connections. Flow-Aide has the ability to dissolve approximately two pounds of calcium carbonate scale per US gallon while at 70 Degrees F in concentrated form. Additional Features Safe Cleaning: Non-Corrosive, Non-Hazardous, Non-Injurious, Non-Toxic, Fully Biodegradable*, Safe to Handle, Zero VOC Appliance Maintenance: Keeps the heating passages of water heaters, coffee makers, dishwashers, and washing machines clean from mineral deposits Boosts Performance: Frequent system cleaning significantly improves efficiency and lifespan of appliances, conserving energy and money Designed to work with tankless water heaters that provide 3/4" hot and cold service connections 1 Quart is 20 Times More Effective than Gallons of Vinegar *Flow-Aide is biodegradable with a BOD value of 16mg/l. This normally allows the product to be water flushed down sewers. Check with local ordinances and regulations in your area prior to disposal. Protect your investment and safeguard your water quality with the JC Whitlam Flow-Aide System Descaler Kit. Trust Flow-Aide to deliver exceptional results and optimize equipment performance. Order yours today and experience the benefits of scale-free appliances! Descaling Procedure: Disconnect power to your water heater. Close hot and cold isolation and service valves and remove service caps. Pour 1.25 gallons of water into bucket and place bucket under water heater. Add 1 quart of Whitlam Flow-Aide into bucket. The higher the concentration, the faster the system will be cleaned. Minimum dilutions is 1 part water to 1 part Flow-Aide. Be sure to have enough solution to keep the pump submersed when in use. Connect one end of one hose to the pump, and the other end of the same hose to the cold service valve. Place pump in bucket. Connect one end of the second hose to hot service valve. Place the other end of the same hose in the bucket with the water and Whitlam Flow-Aide mixture. Open both hot and cold service valves, and plug pump into grounded receptacle. Allow pump to circulate Whitlam Flow-Aide solution through heater for 30-45 minutes, then unplug pump. Close cold service valve, remove hose from cold service valve, and replace service cap. Disconnect the hose from the pump and remove pump from bucket. Discard Whitlam Flow-Aide solution. Flush tankless water heater for 3-5 minutes or until water flows clear by opening the cold isolation valve and allowing water to exit through the hot service valve into a drain or bucket. Close hot service valve, remove hose from service valve, and replace service cap. Open hot isolation valve. Connect power to water heater and return appliance to service. About J.C. Whitlam Since 1900, J.C. Whitlam Manufacturing has been a leader in the plumbing industry, bringing safer, more effective products to the market like Tyte-Unyte, the first lead-free pipe joint compound. Fueled by dedication and innovation, we provide hundreds of products and supplies that are backed by engineering expertise - all to help improve your business as well as the industry Safety Data Sheet Specification Sheet Product Features

Price: 210.27 USD

Location: Walled Lake, Michigan

End Time: 2024-11-17T10:53:43.000Z

Shipping Cost: 0 USD