K-SEAL Permanent Coolant Leak Repair 8 OUNCE BOTTLE ST5501 "Fixes most leaks"

Description: K-Seal Permanent Coolant Leak Repair Fixes most leaks in all types of water cooled engine including cracked heads, head gasket failures, cracked blocks, radiators, heater cores and water pumps.A repair made with K-Seal is permanent, guaranteed for the lifetime of the engine.Unlike inferior coolant products, K-Seal mixes with all types of antifreeze and coolant. There’s no need to drain or flush the system before or after treatment.K-Seal is easy to use. Shake the bottle; add it to the cooling system and go.Treats cooling systems of up to 20 quarts capacityPermanently seals leaks and cracksMixes with all types of antifreezeThere is no draining and no flushingSeals head gaskets, heater cores, and cylinder heads and moreTreats cooling systems of up to 20 quarts capacityK-Seal Instructions:For cooling systems up to 20 litres capacity (cars, vans, LCVs) use the standard K-Seal (236ml). For larger cooling systems (HGVs, coaches etc) use K-Seal HD (472ml). 1. Shake the bottle vigorously for 30 seconds and add the entire contents to the radiator or header/expansion tank. If adding to the radiator do not pour directly onto the radiator core. (For very small cooling systems e.g. motorbikes, it is possible to add just part of the bottle but you must make sure that the contents are extremely well mixed first.) It does not matter if you add K-Seal to a cold or hot engine but take care when working with a hot engine as the cooling system will be under pressure. Also K-Seal is compatible with all types of antifreeze / coolant and is not affected by any other additives that may already be in the cooling system. If you are concerned that the coolant flow may already be restricted we recommend cleaning / flushing the cooling system prior to adding K-Seal. 2. Once K-Seal is in the cooling system run the engine up to operatingtemperature so that coolant is flowing freely around the cooling system. Thequickest way is to take the vehicle for a gentle drive otherwise leave the engine idling until the temperature gauge reaches the normal level. The K-Seal flows together with the coolant and when it reaches the leak will then flow through the hole or crack and make a repair. 3. After K-Seal has made a repair it is not necessary to leave it in the system because the repair is permanent. You can either choose to replace the contents of the cooling system or leave the original K-Seal mixture in the system.If you have an over-pressurising cooling system then please read our troubleshooting guide first. IMPORTANT: Please use extreme caution when working on a hot cooling system as hot coolant and gases could cause injury.If in doubt please consult a qualified mechanic.For further information please contact Kalimex Ltd. ALSO FITS: MOST VEHICLES

Price: 20.43 USD

Location: Costa Mesa, California

End Time: 2023-12-20T01:33:04.000Z

Shipping Cost: 0 USD