Description: ✔ ATTENTION -- SELECT THE CORRECT VERSION: Philips makes TWO versions of their lightstrips (Standard 6-Pin V3 and Micro 6-Pin V4). The Micro 6-Pin V4 has a smaller pin connection and IS bluetooth compatible, while the Standard 6-Pin V3 features larger pins and is NOT bluetooth compatible. Please see the image with both connectors to determine the correct version you have before purchasing. NOTE: This product is NOT compatible with Hue Play and Hue Gradient lightstrips. ✔ ENDLESS DESIGN -- create breaks in your lightstrips, run lights under cabinets, create lighting for shelves, or connect lightstrips across an entire room -- the possibilities are endless! ✔ TECH SPECS -- designed for the Philips Lightstrip system, supports runs up to 33 feet (10 meters), cable is UL listed, made for indoor locations only. ✔ REQUIRED -- these connectors require soldering (equipment not provided)! See our 6-Pin to Cut-End Connector for the non-solder option! ✔ LITCESSORY'S HASSLE-FREE 2 YEAR WARRANTY -- We know you'll love this product, but if you have any issues at all, just send us a message and we'll be happy to assist! Product Description 6-Pin to Cut-End Connector (Solder-On) Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several! This 6-pin to cut-end connector, specifically designed for the Philips Hue Lightstrip system, enables you to connect a cut lightstrip to an uncut Philips Hue Lightstrip Extension or any other Litcessory product (extension cable, splitter, etc.). No more wasting costly lightstrip pieces! These connectors are pre-tinned, allowing for easier soldering onto the cut lightstrip. These connectors require soldering. You MUST use soldering equipment that is not included with this product to use these connectors. NOTE: If you want to connect this product directly to the Philips Lightstrip Plus Controller, you MUST use the Litcessory Controller to 6-Pin adapter to do so. This product is great for Reusing the end of a cut lightstrip MADE FOR INDOOR DRY LOCATIONS ONLY Frequently Asked Questions: Will Litcessory products cause my lightstrip to be dimmer? No, Litcessory products do not affect the brightness of the lights, as long as your total lightstrip run length (lightstrips plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright! What is reverse polarity, and how do I fix it? Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed. I used a cut-end connector and now my lightstrip colors don’t match. How do I fix this? If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the connection points on the lightstrips. Try the following: Unplug the power source Ensure the backside of the connection points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that it is fully inserted. Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”. To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape. If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help! I have a cut Lightstrip. How do I connect another Lightstrip to it? To connect to a cut Lightstrip, you will need a Litcessory Cut-End Connector. We have several options to choose from. Our Cut-End to Cut-End Connectors or our Cut-End to Cut-End Extensions allow you to connect two cut lightstrips with cut ends together. Our Cut-End to 6-Pin Extensions allow you to connect a cut lightstrip to an uncut Lightstrip. I have a cut lightstrip and I need to add a Litcessory extension cable. How do I connect this? To connect two cut lightstrips together with a Litcessory Extension Cable you will need our Cut-End to 6-Pin Connector. 1. Connect to Cut-End to 6-Pin Connector to each cut lighstrip. 2. Plug the extension cable into the 6-pin side of the Cut-End to 6-pin connector Can I split cut ends? Yes, you can do that by using first converting your cut-end into a 6-pin end by using our Cut-End to 6-Pin Extension or our Cut-End to 6-Pin Adapter and adding our extension cable to it. 6-Pin to Cut-End Connector (Solder-On) 6-Pin to Cut-End Connector 6-Pin to Cut-End Extension Connector (50mm) Cut-End to Cut-End Connector Extension Cable (3m) Lightstrip Mounting Tape (16ft) Compatible with Philips Hue Lightstrip Plus ✓ ✓ ✓ ✓ ✓ ✓ Can be placed between the controller and the first lightstrip Yes, with the use of our Controller to 6-Pin Adapter Yes, with the use of our Controller to 6-Pin Adapter Yes, with the use of our Controller to 6-Pin Adapter Not Applicable Yes, with the use of our Controller to 6-Pin Adapter Not Applicable Supports lightstrip runs up to 33 feet/10 meters (lightstrips and extension cables combined) ✓ ✓ ✓ ✓ ✓ Not Applicable Cable is UL Listed Not Applicable Not Applicable ✓ ✓ ✓ Not Applicable Indoor/Outdoor Indoor Only Indoor Only Indoor Only Indoor Only Indoor Only Indoor Only Connection Type 6-Pin to Cut-End 6-Pin to Cut-End 6-Pin to Cut-End Cut-End to Cut-End 6-Pin to 6-Pin Not Applicable 6-Pin Connector Removable? Not Applicable ✓ ✓ Not Applicable ✓ Not Applicable Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several! This 6-pin to cut-end connector, specifically designed for the Philips Hue Lightstrip system, enables you to connect a cut lightstrip to an uncut Philips Hue Lightstrip Extension or any other Litcessory product (extension cable, splitter, etc.). No more wasting costly lightstrip pieces! These connectors are pre-tinned, allowing for easier soldering onto the cut lightstrip. These connectors require soldering. You MUST use soldering equipment that is not included with this product to use these connectors. NOTE: If you want to connect this product directly to the Philips Lightstrip Plus Controller, you MUST use the Litcessory Controller to 6-Pin adapter to do so. This product is great for Reusing the end of a cut lightstrip MADE FOR INDOOR DRY LOCATIONS ONLY
Price: 19.29 USD
Location: Las Vegas, US
End Time: 2024-08-18T08:23:40.000Z
Shipping Cost: 5.24 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Litcessory
Type: N/A
Available Variations
Color: White (Standard 6-pin) - V3
Price: 19.29 USD
Available Quantity: 15
Quantity Sold: 0
Color: White (Micro 6-pin) - V4
Price: 20.39 USD
Available Quantity: 47
Quantity Sold: 0