Litcessory Controller to 7-Pin Adapter for Cync [formally C by GE] Smart Light S

Description: ✔ ENDLESS DESIGN -- create breaks in your lightstrips, run lights under cabinets, create lighting for shelves, or connect lightstrips across an entire room -- the possibilities are endless! ✔ EASY INSTALLATION -- easy to use! Our cables are flat & flexible AND all pin connectors are removable. ✔ TECH SPECS -- designed for the Cync [C by GE] Lightstrip system, supports runs up to 33 feet (10 meters), cable is UL listed, made for indoor locations only. ✔ REQUIRED -- this adapter is necessary if you are connecting any Litcessory product or a Cync [C by GE] Extension Lightstrip directly to the controller! ✔ LITCESSORY'S HASSLE-FREE 2 YEAR WARRANTY -- We know you'll love this product, but if you have any issues at all, just send us a message and we'll be happy to assist! Product Description Splitter C by GE only allows for a single continuous lightstrip run. Litcessory products allow for several! This splitter, specifically designed for the C by GE Smart Lightstrip system, allows for a single run of lightstrips to be split into two different runs. This product is flexible and flat, allowing it to be inconspicuous. NOTE: If you want to connect this product directly to the C by GE Lightstrip Controller, you MUST use the Litcessory Controller to 7-Pin adapter to do so. This product is great for Splitting a lightstrip run into two separate runs MADE FOR INDOOR DRY LOCATIONS ONLY . Frequently Asked Questions: Will Litcessory products cause my lightstrip to be dimmer? No, Litcessory products do not affect the brightness of the lights, as long as your total lightstrip run length (lightstrips plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright! What is reverse polarity, and how do I fix it? Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed. Is the total recommended length of the lightstrip (10 meters/33 feet) affected by the extension cable and/or an ethernet cable? Is it 10 meters/33 feet plus the length of the ethernet cable? We recommend keeping your total lightstrip run under 10 meters/33 feet. This includes the total length of your lightstrips and any Litcessory products and ethernet cables. Some customers have reported success going over this limit, however we have not tested this. How many times can I split? I want to connect 3+ extensions using splitters, will that work? Yes, you will need to connect an additional splitter to the splitter to create the number of connections you need. Can I split cut ends? Yes, you can do that by using first converting your cut-end into a 6-pin end by using our Cut-End to 6-Pin Extension or our Cut-End to 6-Pin Adapter and adding our extension cable to it. Cync [C by GE] only allows for a single continuous lightstrip run. Litcessory products allow for several! This controller to 7-pin adapter, specifically designed for the Cync [C by GE] Lightstrip system, allows for any Litcessory product or a Cync [C by GE] Smart Light Strip Extension to be connected directly to a Cync [C by GE] Lightstrip controller. There are two version of this adapter, a hardwired version and a detachable version. You will need to identify which version you need by looking at your Cync [C by GE] Lightstrip controller. These adapters solve the issue created by the starter lightstrip either being directly attached to the controller (the Hardwired Version) or the issue created by the controller's connector size being smaller than any Litcessory product or a Cync [C by GE] Lightstrip Extension (the Detachable Version). One adapter connects to the controller and the other attaches to the starter lightstrip. Once both adapters are attached, it will provide a 7-pin connection between the controller and the starter lightstrip that can be used to attach any Litcessory product or a Cync [C by GE] Lightstrip Extension. This product is great for Any custom lighting setup where a Litcessory extension cable is placed between the controller and the first strip of lightsInstallations where the controller needs to be placed in a different location than the first strip of lights (for example, to reach a power source) MADE FOR INDOOR DRY LOCATIONS ONLY

Price: 18.19 USD

Location: Las Vegas, US

End Time: 2025-01-18T09:23:41.000Z

Shipping Cost: 5.24 USD