Metsorb Arsenic and Heavy Metal Water Filter (Titanium Dioxide )

Description: 2.5" x 10" patented and NSF 61 certified MetSorb water filter specifically designed for the removal of arsenic and heavy metals from water. MetSorb HMRG 16/60 is a patented titanium dioxide (TiO2) based granular adsorbent media used to remove arsenic III & V (trivalent and pentavalent, respectively), and a wide variety of heavy metals including Lead, Cadmium, Copper, Chromium+6, Selenium, and Zinc from drinking water. It is also frequently used to remove uranium. Reduces As+3 and As+5 to <1.5 micrograms/mL (non-detectable)High capacity > 10 mg As/gm MetSorb (4500 mg/filter)top-performing arsenic removal mediaremoves both trivalent and pentavalent arsenic as well as a wide range of heavy metalsspent media meets requirements for non-hazardous landfill disposalminimal backwash requirements reduces water wastewill not "dump" arsenic upon media exhaustiondoes not require chemical regenerationlow cost per gallon treated - long media life in most applicationsless affected by competing ions than competitive technologiesmade in the U.S.A.Independent testing consistently ranks MetSorb as a leading media for the removal of arsenic. It has a higher capacity and a lower level of ion interference than competitive iron and alumina based media. MetSorb's extremely fast kinetics allow highly effective removal with contact times of only 1.5 to 3 minutes.Operating Conditions / Requirements:Service Flow Rate: 8-10 GPM/ft2Flow Direction: Downward FlowEmpty Bed Contact Time (EBCT): 1.5-3 MinutesTypical Pressure Drop: <5 psiBackwash Flow Rate: 8-10 GPM/ft2Backwash Flow Volumes: 5-7 Bed VolumesTypical Freeboard: 35-40%Minimum Bed Depth: 24 InchesRecommended Bed Depth:30 InchesMaximum Feed Temperature:150FMaximum Recommended pH:8.3Weight:40 lbs per Ft3

Price: 49.95 USD

Location: Dayton, Ohio

End Time: 2024-11-16T05:35:24.000Z

Shipping Cost: N/A USD