Moebius Models 1200 1/25 1953 Hudson Hornet Car Skill Level 3 Model Kit

Description: Moebius Models 1200 1/25 1953 Hudson Hornet Car Skill Level 3 Model Kit Moebius Models 1200 1/25 1953 Hudson Hornet Car Skill Level 3 Model Kit Scale 1/25 The Hudson Hornet is an automobile that was produced by the Hudson Motor Car Company of Detroit, Michigan between 1951 and 1954. The Hornet was also built by American Motors Corporation (AMC) in Kenosha, Wisconsin and marketed under the Hudson brand between 1955 and 1957. The Hornet, introduced for the 1951 model year, was based on Hudson's "step-down" design that was first seen in the 1948 model year on the Commodore. The design merged body and frame into a single structure, with the floor pan recessed between the car's frame rails instead of sitting on top of the frame. Thus one "stepped down" into a Hudson. The step-down chassis's "lower center of gravity...was both functional and stylish. The car not only handled well, but treated its six passengers to a sumptuous ride. The low-slung look also had a sleekness about it that was accentuated by the nearly enclosed rear wheels. In 1952 the "Twin H-Power" version was introduced with dual single-barrel carburetors atop a dual-intake manifold, and power rose to170 hp (127 kW). The hood featured a functional scoop that ducts cold air to the carburetors and was considered "ventilation" in 1954, rather than ram air.[1] The engine could be tuned to produce 210 hp (157 kW) when equipped with the "7-X" modifications that Hudson introduced later.[3] During 1952 and 1953 the Hornet received minor cosmetic enhancements, and still closely resembled the Commodore of 1948. The Hornet proved near-invincible in stock-car racing. Despite its racing successes...sales began to languish. Hudson's competitors, using separate body-on-frame designs, could change the look of their models on a yearly basis without expensive chassis alterations, whereas the Hornet's "modern, sophisticated uni-body design was expensive to update," so it "was essentially locked in" and "suffered against the planned obsolescence of the Big Three [General Motors, Ford, and Chrysler] automakers. The 1953 model year brought minor changes to the Hudson Hornet. The front end was modified with a new grille and a non-functional air scoop hood ornament. Hudson Hornet 1953 model year production totaled 27,208 units. This all new fully detailed kit by Moebius models features authentic chassis and engine, interior, and accurately scaled body panels. FEATURES: Detailed H-145 Engine Authentic Step-Down Chassis Includes Realistic Decals for the Enine Bay and Interior Opening Hood Highly Detailed Interior Optional Sun-visor Over 120 Parts - Skill Level 3 - recommended for age 15 and up Molded in Neutral Gray with Chrome Parts, Clear Parts, and Clear Red Parts Realistic Flexible Vinyl Tires with Tampo Printed Wide White Walls Moebius Models 1200 1/25 1953 Hudson Hornet Car Skill Level 3 Model Kit Moebius Models 1200 1/25 1953 Hudson Hornet Car Skill Level 3 Model Kit Scale 1/25 The Hudson Hornet is an automobile that was produced by the Hudson Motor Car Company of Detroit, Michigan between 1951 and 1954. The Hornet was also built by American Motors Corporation (AMC) in Kenosha, Wisconsin and marketed under the Hudson brand between 1955 and 1957. The Hornet, introduced for the 1951 model year, was based on Hudson's "step-down" design that was first seen in the 1948 model year on the Commodore. The design merged body and frame into a single structure, with the floor pan recessed between the car's frame rails instead of sitting on top of the frame. Thus one "stepped down" into a Hudson. The step-down chassis's "lower center of gravity...was both functional and stylish. The car not only handled well, but treated its six passengers to a sumptuous ride. The low-slung look also had a sleekness about it that was accentuated by the nearly enclosed rear wheels. In 1952 the "Twin H-Power" version was introduced with dual single-barrel carburetors atop a dual-intake manifold, and power rose to170 hp (127 kW). The hood featured a functional scoop that ducts cold air to the carburetors and was considered "ventilation" in 1954, rather than ram air.[1] The engine could be tuned to produce 210 hp (157 kW) when equipped with the "7-X" modifications that Hudson introduced later.[3] During 1952 and 1953 the Hornet received minor cosmetic enhancements, and still closely resembled the Commodore of 1948. The Hornet proved near-invincible in stock-car racing. Despite its racing successes...sales began to languish. Hudson's competitors, using separate body-on-frame designs, could change the look of their models on a yearly basis without expensive chassis alterations, whereas the Hornet's "modern, sophisticated uni-body design was expensive to update," so it "was essentially locked in" and "suffered against the planned obsolescence of the Big Three [General Motors, Ford, and Chrysler] automakers. The 1953 model year brought minor changes to the Hudson Hornet. The front end was modified with a new grille and a non-functional air scoop hood ornament. Hudson Hornet 1953 model year production totaled 27,208 units. This all new fully detailed kit by Moebius models features authentic chassis and engine, interior, and accurately scaled body panels. FEATURES: Detailed H-145 Engine Authentic Step-Down Chassis Includes Realistic Decals for the Enine Bay and Interior Opening Hood Highly Detailed Interior Optional Sun-visor Over 120 Parts - Skill Level 3 - recommended for age 15 and up Molded in Neutral Gray with Chrome Parts, Clear Parts, and Clear Red Parts Realistic Flexible Vinyl Tires with Tampo Printed Wide White Walls × Buy now and save! Tell a friend Visit store Watch now Postage info Click the Postage tab above the listing description for more info Click the Postage tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Kadee HO Scale #10, Bulk Pack Kadee #5 Couplers (10 pair) Tangent 25518-08 HO Scale 86' Auto Parts Boxcar Grand Trunk Western GTW 305774 Tangent 25518-05 HO Scale 86' Auto Parts Boxcar Grand Trunk Western GTW 305759 Tangent 25518-03 HO Scale 86' Auto Parts Boxcar Grand Trunk Western GTW 305742 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © White Rose Hobbies Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 32.99 USD

Location: York, Pennsylvania

End Time: 2024-09-26T01:06:31.000Z

Shipping Cost: N/A USD