Description: The project this motor was going to be used in did not happen. The ME1616 is a Radial Air Gap, Permanent Magnet Synchronous Motor (PMSM) with an Internal Permanent Magnet Rotor (IPM). This motor is designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4. FeaturesQuiet Operation Excellent durability High 92% Efficiency Smooth acceleration Low coggingLow torque ripple at low speedWater cooled stators3/8" Cooling portsSine/cosine speed sensor Anodized aluminumTemperature Sensor SpecificationsPower: 20 kW Continuous, 55 kW Peak 5 pole pair motor (10 magnets).92% efficiencyVoltage: 0 to 150 VDC input to the controlCurrent: 250 Amps AC continuousPeak current: 660 Amps AC for 1 minute (660 Amps DC into the motor control)Rotor Speed (unloaded): 5000 RPM at 72V, 5500 RPM at 84V, 6500 RPM at 96VMaximum Rotor Speed: 8000 rpmWeight: 56 poundsTorque constant of 0.22 Nm per AContinuous Torque: 45 NmPeak Stall Torque: 134 NmCooling: Water cooled (50% Glycol)Includes temperature sensor The Kelly motor controller to pair with this motor is on my page.
Price: 1000 USD
Location: Irvine, California
End Time: 2024-11-11T07:40:44.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: ME1616
Rated/Full-Load Torque: 134
Full Load Amps: 660A
Base RPM: 5000
Rated Load (kW): 55
Shaft Type: parallel keyway
AC Motor Type: Synchronous
Shaft Diameter: 7/8 inch
MPN: ME1616
Insulation Class: H (Max 180°C)
Mounting Type: Flange-Mounted
DC Stator/Winding Type: Permanent Magnet
Brand: Motenergy
Reversible/Non-Reversible: Reversible
Current Type: AC
Unit Type: kg
IP Rating: IP67
Nominal Rated Input Voltage: 120 V, 150v, 24 V, 48 V
AC Phase: Three Phase
Unit Quantity: 26
Country/Region of Manufacture: China
