MRU SWG 100 Gas Detector

Description: The MRU SWG 100 gas detector measures:O2 as percent from 0-25% CO2 as percent from 0-40% CO as percent from 0-10% CxHy as CH4 as percent from 0-4% NO as PPM from 0-1,000 NO2 as PPM from 0-200 SO2 as PPM from 0-2,000 IP54 aluminum cabinet with anti‐corrosive red structural lacquer and monitored fan ventilation • Peltier gas cooler and automatic condensate draining pump • Efficient sample gas filtration using PTFE sintered particulate filter • Regulated sample gas pump with sample gas flow monitoring and alarm • Filtration of acid gases to protect the internal sample gas flow sensor • Solenoid valve for auto‐zero with clean ambient air • Solenoid valve for calibration gas supply, with fine pressure regulator at cal. gas inlet port • Gas inlet ports, either for heated or for non‐heated sampling lines, must be selected from the optional items list • human machine interface with color TFT display, keyboard and standard RS485 interface (Modbus RTU) • All password protected, intuitive software guided menu, with diagnosis software and logbook • Power supply analyzer only 230Vac / 47‐63Hz / 90W (110Vac power supply on request) • Total length of all heated sampling lines more than 60m, requires 3‐phase power supply (L1 ; L2 ; L3 ; N ; PE) • Clean indoor mounting place, preferably air conditioned • Outdoor mounting place in clean, +5°C to 45°C ambient, with mandatory sun & rain protection (user scope) The flue gas analysis system SWG100 is the rugged, low cost industrial gas analyzer for: 1. flue gas / stack gas / exhaust gas emission sites of relatively clean combustion sites many other industries diesel gensets / biomass boilers 2. methane / natural gas boilers2. 3. landfill gas / biogas CHP's 4. bagasse and biomass boilers many other industries Instrument main features are: 1. included single heat exchanger Peltier gas cooler with automatic condensate draining pump 2. up to max 5 gas electrochemical sensors (ECS) measurement with O2/LL ‐ CO ‐ NO ‐ NO2 ‐ SO2 upto6gasmeasurementwith3xECSforO2‐NO‐NO2and3‐gasndirbench CO‐CO2‐SO2(orCH4orC3H8) true NOx and SO2 measurements requires heated gas sampling probe and heated gas sampling line 3. up to maximum 5 sampling points switching possible when using non‐heated PTFE sampling line 4. up to maximum 3 sampling point switching possible when using heated sampling line (100W / meter power demand) no dilution of sample gas is required, simultaneous measurement of all gas parameters 5. direct and continuous measurement, with pressure and temperature compensation 6. automatic zeroing using clean ambient air and separate calibration inlet port 7. internal sample flow monitoring and alarm of probe or internal filter clogging 8. sampling from low suction ‐200mbar up to +50mbar pressure of flue gas aluminum cabinet with anti‐corrosive red structural lacquer, 700x800x280mm (WxHxD) and 30kg weight

Price: 14500 USD

Location: Houston, Texas

End Time: 2023-12-11T15:25:51.000Z

Shipping Cost: N/A USD