NDS 1224GY 12 in. Square Catch Basin Drain Grate, Decorative Wave Design, Gray

Description: NDS 1224GY 12 in. Square Catch Basin Drain Grate, Decorative Wave Design, GrayCondition: NEW Let the currents of excess stormwater flow away into the decorative catch basin drain grate featuring the wave design. With a stylish look inspired by nature, the drain grate complements its surroundings and features 3/8 in. grate openings to block pipe-clogging leaves and debris as it drains the excess water away. Ideal for draining moderate flows from lawns, landscaped areas, patios, walkways, and under downspouts. Drain grates, also known as drain covers, help keep your drain system running smoothly. As part of a complete drainage solution, they fit on top of 12 in. catch basins, risers, and low-profile adapters connected to drain pipes which carry the water to a discharge point downstream such as a pop-up emitter, or to percolate into the ground with a dry well or infiltration trench. The elegant plastic drain grate overlaps the top edge of the basin for a full, decorative effect. Made of polyethylene treated with UV inhibitors to prevent fading and cracking, with open surface area of 25.7 sq. in. and 79 GPM flow rate. Rated for NDS Class B loads when properly installed and is ADA compliant. Decorative drain grate complements its surrounding; protects your drainage system by blocking leaves and debris from entering and clogging the pipeline while letting excess surface water flow through with a drain grate Use with the 12 in. catch basin, riser, or low-profile adapter to drain moderate flows of excess stormwater from lawns, landscaped areas, patios, walkways, and under downspouts Fits 12 in. Catch Basin Drain, 12 in. Riser, and 12 in. Low-Profile Adapter 25.7 sq. in. of open surface area. 79 GPM flow rate Rated for NDS Class B loads (up to 175 psi) when properly installed-recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph; ADA compliant Made to fit 12 in. square catch basins, risers, and low-profile adapters Decorative grate with wave design overlaps the top edge of basin for a full, decorative effect Easy to install; cover fits on catch basins, risers, and low-profile adapters and can be secured with screws Grate made of high-density polyethylene (HDPE) using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking Use with a square catch basin, riser, or low-profile adapter to capture stormwater runoff and stop debris from entering and clogging your drainage system

Price: 29.98 USD

Location: Richmond, Virginia

End Time: 2024-02-02T00:55:35.000Z

Shipping Cost: N/A USD