Description: Indicator NOT included, only lens and bezel. These are new replacement for Teclock indicators. These are for type 2 teclock indicators. Model AI-921 . Outside diameter 2.30 (over knurled area) Outside diameter at finger clamp surface 2.255 Inside diameter where number plate fits 2.032 CHECK DIMENSIONS AS THIS IS TYPE 2 AND LARGER THAN TYPE 1 WITH SAME MODEL NUMBER ON INDICATOR. looks like teclock made two different indicators with different size bezels. I've found the words on the face plate read as " teclock corporation in japan" then this lens and bezel fits. I've changed the face shape to a smooth transition to glass area instead of original type with sharp point that held oil/coolant and hard to clean. See pictures Compatible with orginal standard teclock lens if at a later date you need to replace only the lens. Easy replacement, check out utube videos how to install Tips and tricks: If your number dial spins in bezel. Very carefully crimp outer edge, catch only .03 of the edge so it wont show when assembled. You will see the other Teclock crimps in 3 places. You will only need 1 crimp maybe. Just a very light crimp only as you only need .001 to .002 . Ive found many times no crimp is needed. Seat dial plate in bezel completely before installing onto indicator. Instructions: 1. Remove 4 screws on back cover. Remove cover 2. See picture with screw driver. Loosen this screw, but don't remove. Only this one screw needs backed off, all other screws inside leave alone. Then slide the small plate towards center. Should move maybe 1/16". 3. Turn over indicator and lift from the tab side you released. Be careful of the indicator marker. As seen in the pictures. 4. Lift up about 1/8" and move lens/bezel to opposite side slightly. This unhooks the opposite side from a spring ( spring is shown in pictures) Be careful not to loose the tiny spring as its held in with the bezel only. 5. Install new bezel in reverse order. 6. Don't over tighten the tiny screws. Excellent quality made by APM. See our other precision machinist tools. Check my 100% ebay reviews and be confident when buying.
Price: 9.95 USD
Location: Battle Ground, Washington
End Time: 2024-12-13T20:01:43.000Z
Shipping Cost: 6.95 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: APM
Model: Teclock bezel and lens only
Indicator Type: Dial Indicator
MPN: Does Not Apply
Country/Region of Manufacture: United States
