Nintendo NES Front Loader Capacitor Kit & new 72 pin Fix no power sound or video

Description: Up for sale is an Nintendo NES Front Loader (NES-001) capacitor replacement kit with brand new 72 pin connector. It includes every capacitor used by the Nintendo NES Front Loader (NES-001) system. Bad capacitors and dirty 72 pin connector can lead to the following problems: 1) Low or no sound 2) Dim or no video (Will not fix vertical or horizontal lines) 3) No power 4) Red Blink of Death While these problems can be caused by other issues with the system itself, faulty capacitors are notorious for causing these problems. However, it is important to point out that you shouldn’t buy this kit hoping it will fix your particular issue, unless you are sure faulty capacitors are the cause of the problem. This repair takes considerable soldering skills and knowledge. Please don’t attempt this repair without such skills as I will not be responsible for loss or damage. Furthermore soldering equipment is needed. The repair takes approximately 1.5-2 hours to complete and significant patience. There are about 5 variations of the power/video modulator and each one is unique as they have different capacitor values and voltages.The most common one is the Alps power and modulator PCB that needs 9 aluminum electrolytic capacitors (including main board caps). To ensure that you are getting the right kit for your system please check the inside of your console and look for the name on the silver box where the video/power connections are located. All capacitors are high quality various branded capacitors including Panasonic.In addition a step-by-step installation guide will be provide if needed.All capacitors have the same ratings as the original ones in the system. Included with this capacitor Kit :All capacitors needed for the type of Modulator you have. (granted you choose the right kit for your system)1 brand new 72 pin connector (made in Taiwan not China like most that are sold on ebay) You will need the following tools : (NOT INCLUDED)#2 Phillips screwdriverSmall flat head screwdriverSoldering Iron (preferably with a small tip)Solder sucker / Solder wickTin Solderan NES-001 (Front Loader NES)and Possibly a small file.***Please note that the Nintendo modification should only be attempted by a person with adequate soldering skills and equipment. No warranty is expressed or implied. If you feel that you would rather have me do the work for you I can do this for $35 plus return shipping. (please contact me to arrange a recap) I also offer many other services for retro consoles, Examples:LED Add on lights for all classic consoles.Repair Blinking NES/recapping service.RGB for PC ENGINE/Turbografx/N64/SNES mini/NES (with NESRGB board purchase)Region select for different types of systems.Sega Genesis S-Video add on and repairsand many many moreBuy with confidence just look at my feedback. Please feel free to email me if you have any questions. NES NOT INCLUDED !

Price: 19.99 USD

Location: Sun City, California

End Time: 2023-11-21T06:05:50.000Z

Shipping Cost: 0 USD