Nye 880 Fluorocarbon Gel Lubricant PTFE Thickened Dimethyl Silicone Grease 9#

Description: Nye 880 Fluorocarbon Gel Lubricant PTFE Thickened Dimethyl Silicone Grease 9# NEW! **************************************** FREE SHIPPING!! ****************************************** New in sealed drum, 9 pounds net wt, 11 pounds gross wt. (actual weight 171.822 ounces). Note, see pictures, the can was slightly dented during handling. Comes with Safety Data Sheet. This is a PTFE thickened, dimethyl silicone grease originally designed for brake calipers, brake cable & ball joints. This grease meets the requirements of DaimlerChrysler: MS-7751, Ford: ESA-M1C200-A, GM: 9985493. The recommended service temperature range is -40 to 200 C. Although this grease was originally designed for automotive and aviation brake and ball joints applications due to it's excellent mechanical and lubrication qualities with it's compatibility with most rubbers and plastics it has been the grease recommended for use in wind turbines and in coal power plants as a gasket lubricant and sealant in all of the joints of the plant fuel feed piping. Benefits include excellent water resistance and mechanical stability over a wide temperature range. The MSRP of this grease for this quantity is $2200. See below and our photographs for additional technical specifications. This listing is for ONE (1) Can of Nye 880 Fluorocarbon Gel Lubricant PTFE Thickened Dimethyl Silicone Grease 9-pounds net wt. Thanks for looking!! From the manufacturer: Contact seal rings in wind turbine yaw gear motors can benefit from a lubricant. Nye Fluorocarbon Gel 880 is a unique heavy viscosity lubricant that protects the elastomeric seal material from environmental elements & wear. In wind turbines, seals are exposed to extreme conditions including salt corrosion, harsh weather, icing and extreme heat. Fluorocarbon Gel 880 is well suited for lubricating seals, providing very low friction at the widest operating temperatures and ensures long operating life of seals and components protected from the harshest operating environments. Its silicone base oil makes it compatible with most plastics and rubbers used in the seals. It has excellent water washout resistance and very low evaporation. Coal power plants use Fluorocarbon Gel 880 as a gasket lubricant and sealant in all of the joints of the plant fuel feed piping. The lubricant prevents coal leaks in the piping when coal dust is transferred from the crusher to the boiler. Fluorocarbon Gel 880 acts as a sealant. It can withstand a wide range of temperatures and it ensures long operating life of seals and components protected from the harshest operating environments. Its silicone base oil makes it compatible with most plastics and rubbers used in the seals and gaskets. It has excellent water washout resistance and very low evaporation. Fluorocarbon Gel 880Specialty lubricants for automotive components must be able to protect components while withstanding harsh environmental conditions. Fluorocarbon Gel 880 is a PTFE-thickened, heavy viscosity dimethyl silicone grease with excellent mechanical stability under a wide temperature range. This grease is suitable for use on automotive components where good water spray and resistance is needed such as: Jounce BumpersBall JointsStrutsParking Brake CablesStabilizer BushingsWindow Regulator Assemblies Advantages:Exhibits plastic compatibility Extends component life Reduces wearPrevents ‘stick/slip’Excellent low temperature torque capabilitiesVery high viscosity index Specifications:General Motors #9985493 FCA #MS-7751 Ford: ESA-M1C200-ADaimlerChrysler: MS-7751 Application TypeGrease1 Part or 2 Part1 PartMaterial FormGreaseSubstrateMost rubbers used in the seals, Most plastics used in the sealsIndustryYaw Gear Motor, Wind TurbinesManufacturerNye LubricantsChemistryDimethyl silicone, PTFE thickenedViscosity (cPs)Heavy, 7349 (cSt), 18407 (cSt)Water ResistanceChemical Resistance: Fluid Resistance: Excellent water resistanceHigh Temperature Resistance (°C)200Low Temperature Resistance (°C)-40Other ResistanceProtects the elastomeric seal material from wearEvaporation (%)Very low, 0

Price: 1000 USD

Location: Chardon, Ohio

End Time: 2024-10-30T16:50:47.000Z

Shipping Cost: 0 USD