Pearl Drilling Machine Jewelry Making Equipments Bead Polishing Tools 280W

Description: Pearl Drilling Machine Jewelry Making Equipments Bead Polishing Tools 280W280W 110V Pearl Drilling Machine Driller Full Set Drill Holder for Jewelry ToolsDescriptionWhen we walk into a jewelry store, a dazzling array of jewelry often attracts our attention. At this moment, our pace slows down and our hearts are satisfied. A piece of beautiful jewelry can not be separated from powerful drilling. Our pearl drilling machine is made of fine materials and workmanship, so we can provide you with quality assurance. High efficiency and simple operation procedures can provide symmetrical and exquisite jewelry in a short time.Key FeaturesExquisite Material: This drilling machine is mainly made of aluminum, which is wear-resistant and corrosion-resistant, so you can use it for a long time without frequent replacement, which will save you cost to some extent.High Efficiency: The drilling machine uses a 280w pure copper motor, which consumes less energy, has a small resistance, and can rotate at 15000rpm. It can complete the drilling operation in a short time, so you don’t have to wait for a long time.Adjustable Design: The drilling machine is equipped with a stepless speed regulation switch and depth adjuster for targeted drilling according to different jewelry to provide you with more refined pearls.Multiple Sizes: The package includes 15 sets of special collets and drill bits made of plastic and copper, which can be used to drill most pearls without damaging them, and the fixing effect is good, fully meeting your needs.Simple Operation: The drilling machine is equipped with a power auxiliary handle device and a pedal switch. You just need to place the pearl on the installed machine and then operate it through the handle and pedal switch without tedious steps, allowing you to focus on the drilling and create perfect crafts.Small Floor Space: The product size is 9*3.9*4.3inch, which will not take up too much space. After use, it can be placed in the studio or room at will.Easy to Clean: The drilling machine has a smooth surface and s small size, so you can clean it easily. You can just wipe the dust off with a towel.Convenient Storage: The package of the drilling machine includes a storage box, which can store all kinds of small items, which is not only convenient for you to find but also conducive to preventing the loss of items.Protective Packaging: The foam is used in the packaging of the drilling machiner, which can better protect the product during transportation and delivery.DetailsBead Holder: This accessory enables the drilling machine to drill holes without regular cleaning of pearl powder chips, so as to ensure the long-term normal use of the drilling machine.Needle Chuck: The product is equipped with twist needles of different sizes, with diameters of 0.02inch, 0.03inch, 0.02inch, 0.04inch, and 0.047inch respectively. When punching, you need to insert the needle slowly to avoid twisting the needle or breaking the bead.Anti-slip Foot Mats: The drilling machine is equipped with a stable base with four foot mats made of cast iron, which can play the role of anti-slip and make the drilling machine run more stably, so your jewelry will not be damaged due to misoperation.ApplicationThe product is applicable to natural or synthetic jewelry with a diameter of 3-35mm/0.12-1.38inch, such as freshwater pearls, seawater pearls, South China Sea pearls, Tahiti black pearls, pearl oysters, coral, amber, gold, silver, copper and other accessories. At the same time, the product can also be widely used in jewelry stores, jewelry manufacturers, etc.How to Install1. Install the depth regulator2. Install the auxiliary handle.3. Install the clamp.4. Install the plastic round handles on both sides and adjust the spacing between the clamps.5. Install the bottom dust hole.6. Plug in the voltage and adjust the distance.SpecificationsColor: Black+ Yellow+GreenModel: KYDOverall Material: AluminumMaterial of Foot Mat: Cast IronMaterial of Motor: Pure CopperMaterial of Collets and Drill Bit: Plastic and CopperType: Jewelry ToolsPlug Type: US StandardVoltage: 110VPower: 280WSpeed: 0-15000 rpmSuitable Diameter of Jewelry: 5-35mm/0.2-1.38inchDiameter of Needles: 0.5mm/0.02inch, 0.8mm/0.03inch, 0.6mm/0.02inch, 1mm/0.04inch, 1.2mm/0.047inchClamping Range: 0.3-4mm/0.012-0.16inchGross Weight: 4.85kg/10.69lbsNet Weight: 4.5kg/9.9lbsProduct Size: 23.5cm*10cm*11cm/9*3.9*4.3inchPackage Size: 30*20*20cm/11.8*11.8*7.87inchPackage Included1 * Pearl Drilling Machine 1 * Pedal Switch1* Bilingual Instructions(English+Chinese)1* Tool BoxAll Accessories for UseNotesPlease strictly follow the instructions when you use this product.Please tighten everything, including your pearl and needle!Make sure that the drill bit has been tightened with T-lock and is in the center position.4. You can use a very small stream of water to prevent cracking, and prevent the drill from being destroyed.5. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Nov 7, 2024 at 22:55:37 PST, seller added the following information:

Price: 60.02 USD

Location: Chino, California

End Time: 2024-12-02T01:57:36.000Z

Shipping Cost: 0 USD