PETG 3D Printer Filament, 1kg(2.2lbs) Spool PETG 1.75mm PETG(Yellow)

Description: Features & details PETG filament combines the advantage of PLA and ABS filaments, which are odorless, flexible, durable and highly impact resistant. Enhanced adhesion, less warping and stable filament diameter guarantees print quality. No jamming, no bubbles and neatly winding making Firos PETG filament provides you with a great printing experience. This 1.75mm 3d printer filament compatible with most common 3D printers, such as Creality Ender 3 , Ender 3 Pro, Prusa, Makerbot, ANYCUBIC, Monoprice Mini Delta, SCRIB3D, MYNT3D, Flashforge, etc. 3D printer filament with 1.75 mm diameter + / - 0.03 mm; Recommended Nozzle Temperature 210 - 230°C (410 - 446°F). Heat Bed 65-85°C (149 - 185°F).Spool Diameter: 7.87" - Spool Width: 2.72" - Spool Hub Hole Diameter: 2.13". The PETG filament completed dried for 24 hours before packaging and vacuum sealed with desiccants in a bag to prevent moisture absorption. This Filament is clog-free, bubble-free and tangle-free, which will give you a smoother and more stable printing experience. PETG filament has a length and weight scale on the spool which makes it easy for you to monitor. Each spool of PETG filament weighs 1 kg (2.2 lbs) approx 330 m. 1.75 mm PETG filament is produced friendly to the user and the environment. Q：Why doesn't the filament stick to the build bed easily? A: 1. Temperature. Please check the temperature(bed and nozzle) settings before printing and set it suitable; 2. Leveling. Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed; 3. Speed. Please check if the printing speed of the first layer is too fast. Q: How to solve the clog problem in the process of printing? A: 1.It is necessary to clean up the filaments blocked in the tube throat before printing for the second time. 2. For silk PLA filament, the softening temperature is lower, you can turn off the retraction setting. Q: How to avoid tangles when printing? A: 1. When you take the filament out from the bag without fixing the filament ending, inadvertently it slips to the coil and mess with strings, you will need to take a while to find the end and pick it up then inject to extruder. In this process, foreshadowing of tangle has been laid. After you print hours later and as the tension gets tighter, the filament will stuck and the printing will stop. 2. So please fix the filament end at each time printing, please fix the filament end at the spool hole to make sure the filament won't loose at any time. Q: How to fix problems with holes or gaps in the top layer of printed models? A: 1. Increase the number of solid layers on the top layer. The top solid layer should be printed at least 0.5mm thick, usually in multiples of the nozzle. It is recommended that 1.2mm be used. 2. Increase the prints fill rate. Q: How to store the 3D printer filament? A: 1. The filament tends to absorb moisture from air, which can make it brittle or degrade. Once the package is opened, we recommend you put the filament with desiccant in a sealed bag, or something comparable. 2. You can also put your 3D printer filament in a dryer box. It will get moisture out of filaments and help you solve most printing problems like clogging, layer shift, stringing and adhesion. It can help you get better printing results. Q: How to get a wonderful printing item? A: 1. Please use 0.4mm or larger than 0.4mm nozzle to print. 2. It is recommended to apply PVA glue if your plate surface has been used for a long time. This will help you solve the problem of hard sticking to the build bed or warping. 3. If you don't use the filament for some time, please store the filament in a large zipper storage bag to prevent from absorbing moisture, thus make the filament in dry situation with better storage life.

Price: 10 USD

Location: Utica, Michigan

End Time: 2024-11-07T02:54:47.000Z

Shipping Cost: N/A USD