Prusa Hotend Assembly (PTFE Tube Included) for MK3 MK3S MK3S+ Genuine E3D

Description: Prusa Specific E3D V6 Hotend (24 volt) The only difference between the MK3/MK3S/MK3S+ hotend versions is the PTFE tube. By selecting your printer model above, you will get a hotend with the proper PTFE tube for your printer. Includes (assembled): 0.40mm nozzle (1 pcs) Heatsink (1 pcs) Collet with clip (1pcs) Prusa specific heat break (1 pcs) Heater block (1 pcs) Heater cartridge - 24 volt (1 pcs) Thermistor - Prusa specific (1 pcs) PTFE tube for model of printer chosen (1 pcs) Notes: - These may have either a red or white heater cartridge wire, both are 24 volt 40 watt heaters and function the same. - The Molex connector for the heater cartridge is NOT included. Please reuse your old connector. If you need a new one, it can be purchased here. - This is a 24V hotend and is intended for use with the Prusa MK3 or MK3S/+. Do not install or use on a 12 volt printer. - Occasionally the heatsink arrives a little loose on the heat break. if this happens, tighten the heatsink to the heat break by hand. Do not use tools, do not over tighten. Fits (select above): Prusa MK3 Prusa MK3S Prusa MK3S+ The Prusa-specific iteration of the E3D v6 HotEnd is intended as a drop-in replacement for your original Prusa i3 MK3 or MK3S/+ printer. It offers the same all-metal, high-performance reliability of the v6, while swapping out several of E3D's standard components with Prusa-specific parts. These include a 40W heater cartridge for increased power, a longer thermistor and a heat break with Prusa-specific internal geometries - designed to improve retractions with the Multi-Material upgrade.

Price: 88.75 USD

Location: Millersburg, Ohio

End Time: 2024-08-01T18:53:21.000Z

Shipping Cost: 6.99 USD