Pure Tung Oil 250ml

Description: Pure Tung Oil 250ml 100% natural Food safe Zero VOC No additives No petro-chemicals Product Pure Tung Oil Size 250mL, 1L, 10L, 20L Coverage First coat: diluted at a rate of 50/50 (oil/solvent) 18 - 20m2 Subsequent coats: diluted 50/50 25-30m2 Description Tung oil is a transparent or slightly turbid liquid, extracted from the seeds of the tung nut (tung tree). Used For Ideal for timber treatments where water repellency is required. Food safe finish when used pure/undiluted. Timber sealer Decking oils Concrete sealer Furniture & floor oils Chopping blocks & kitchen utensils Woodwork finishes Surface Preparation Ensure the surface is clean and dry before application. Gilly's LoThin can be used for a vigorous clean. For a lighter clean, you can use an all purpose cleaner. If there is any oil, wax, grease, dirt or similar residue on the surface, it may affect the tung oil's ability to cure - so a thorough clean is important. How to Apply To Raw Timber Blend with Gilly's Lothin, d-limonene or turpentine at a ratio of 50/50. Rub or brush oil into the timber. Lighter coats are better. For floors and large areas, you can use a floor applicator with lambswool pad. Let it sit for 5 minutes. Wipe on more oil to areas that become dull, as the oil soaks in. Wipe off any excess oil within 10 minutes, and buff back firmly. This ensures even coverage and no 'sticky spots'. You can lightly sand back whilst still damp, but it is not a necessary step. Use 320 grit or finer if you choose to do so. Apply 3 coats, repeating the same procedure. Best to wait 24 hours between coats. Apply more coats if desired or necessary. Lighter coats are best, especially after the first coat. Hang out any rags or soak in water. Don't leave scrunched up, due to risk of combustion. Dry Time 24 hours to dry between coats. As there are no driers, it can take 4 weeks to completely cure. Light usage is however perfectly fine within this time frame. There should be general water repellency within the first week if the conditions are right. Maintenance For general maintenance and wear, you can assess as you see fit. We would recommend reapplying a light coat every 12 months to keep your timber looking fresh. Over time, with the right maintenance, the finish will only get stronger. When damaged, no sanding is required, you can reapply as needed, even to small areas. Clean Up Cleanup with Gilly's Lothin. Warm, soapy water for hand washing. Safety Do not eat, drink or smoke around product. Wash hands after use. Hang out rags to dry, or soak in water. Don't leave scrunched up, due to risk of combustion. Contact Gilly's for SDS Ingredients Tung oil 100% Read more about tung oil here SHIPPING RETURNS PAYMENT Australia Post Shipping Times (from their website) Sending to same state: Metro - up to 3 business days Country - up to 5 business days Sending interstate: Metro - up to 3-6 business days, depending on lodgement and destination points Country - Please ask at your local Post Office Domestic returns accepted within 30 days of receiving an item, with postage at expense of the buyer. Items must be unused in their original condition. Should a product be faulty or damaged in any way from the supplier or through transit, the product will be exchanged with any return postage costs at the expense of the supplier. Items will be shipped once payment is received through the available options. ABOUT OUR COMPANY Gilly’s is an Australian owned and operated manufacturer of sustainable timber care products. Founded in 1983 by Gilly Stephenson, to create a range of premium beeswax-based polishes suitable for use on fine antiques. The range however, has since expanded to service furniture makers, home stores and the hardware sector. Gilly’s has a strong focus on quality, sustainability and customer service. © Copyright 2017

Price: 39 AUD

Location: Malaga

End Time: 2025-01-02T13:22:55.000Z

Shipping Cost: 9.37 AUD